With some luck it will be ready today, I’ll report back
Yeah sorry Eric. It was pretty clear the engine didn’t lose pressure so it’s unlikely there’s any real issue based on the story told. It doesn’t need full oil capacity to produce enough oil flow
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
With some luck it will be ready today, I’ll report back
How confident are you that you didn't overfill it ? If it was significantly overfull that could have helped pop a seal.
Mine had a DPF. It's an import. It was the first year the DPF was available and it was a "Holden Captiva" grade disaster (much like lots of things on this car).
It also has the FBH (which doesn't work) African/Middle East spec aux fuel cooler (which is bypassed as it leaked) and is equipped with all the underbody rust that comes with spending the first 4 years of its life on UK roads.
In fact the only thing that hasn't played up on the car is the 6 speed Manual box. Though with the way my wife gets on with the clutch is only a matter of time.
99% confident, I only ever put in what I take out - unless the dipstick still showed low but in this case it didn’t.
but The reason I posed it as an option is I didn’t check it before I started the oil change so if they added any during the service perhaps it was high to start. Can they change seals without changing oil?
But the seal area must be absolutely clean of oil otherwise the seal will push out.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Picked up the car today.
appears to be running perfectly - phew!
And no charge which is nice (and surprising).
Fingers crossed this seal stays put.
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks