Results 1 to 3 of 3

Thread: Nanocom D4 Ride Height

  1. #1
    Join Date
    Mar 2007
    Location
    Tarneit VIC
    Posts
    820
    Total Downloaded
    0

    Nanocom D4 Ride Height

    Hi. Since I have nanocom that I use for my D2. Can I set the D4 ride height using nanocom after I get the unlock code for D4 or I need to get LLAMS?

    Thanks

  2. #2
    Join Date
    Nov 2015
    Location
    Black Rock
    Posts
    1,228
    Total Downloaded
    0
    You can test, adjust and reset the EAS system with the Nanocom but it is a diagnostic tool, not a permanently fixed height adjustment switch. For that you need Llams or some other similar kit. But first look at whether you really need it. I have found it really useful in the bush, particularly when you need to travel in off-road height a little quicker than the EAS will allow. Mushy snow over a muddy track, soft sand or mud where you need a bit of momentum, traversing a paddock, that sort of stuff. Also good to place in extended mode when you want to work under the car. But always use four axle stands as a safety backup.
    2013 D4 expedition equipped
    1966 Army workshop trailer
    (previously SII 2.25 swb, SIII 2.25 swb & lwb, P38 Vogue, 1993 LSE 3.9V8 then HS2.8)

  3. #3
    Join Date
    Mar 2007
    Location
    Tarneit VIC
    Posts
    820
    Total Downloaded
    0
    I have a mate who uses this to control the height plus it’s Bluetooth so easy to install and use. It’s a Bluetooth diagnostic tools as well like nanocom.
    Since I don’t have the unlock code for D4 on my nanocom I thought I ask here first otherwise if it’s not work I will get one like my mate use.


Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!