It seems that I need to be interested in this topic as my air filter element was very dirty at 45K, so the external air vent still manages to allow plenty of dust to be ingested. I fitted a snorkel to my D2 because of the dust.
I never really noticed a difference on the D3's (and I've had both), but the Safari seemed a little noisier. I was suspicious of the Safari's effect on my fuel consumption, but I could never really pin it down to the snorkel alone, as I'd modified quite a few other things by then.
Cheers,
Gordon
 Swaggie
					
					
						Swaggie
					
					
						It seems that I need to be interested in this topic as my air filter element was very dirty at 45K, so the external air vent still manages to allow plenty of dust to be ingested. I fitted a snorkel to my D2 because of the dust.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
 Swaggie
					
					
						Swaggie
					
					
						I've been slack, not having checked the D4's filter at all. My D2's got clogged enough to seriously affect fuel consumption after 10K but its intake was from the inner guard. I'll check this one in 10K, as long as I remember!
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Yes Graeme, you must remember.
 Swaggie
					
					
						Swaggie
					
					
						Its in my maintenance schedule now, not that there's any guarantee that it will be looked at like a lot of other equipment maintenance.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
 Swaggie
					
					
						Swaggie
					
					
						How is the mudguard air grille removed? Gauging by the dirt in the tube, it looks as though dirt is being drawn from where the tube joins behind the grille and if so, I'll seal that for starters.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
If you mean the decorative grill that sort of fills the air intake hole in the side of the fender, it seems the "approved" technique is to stand with your back to it, then put both hands behind your back, grab the grill louvers with your fingers and pull upwards and tip out from the bottom.
That "back to the grill" position seems to put an even pressure on the plastic and the louvre justs moves up a bit and tips out from the bottom.
 Swaggie
					
					
						Swaggie
					
					
						Thanks bbyer. That'll save me breaking off retaining tabs at least.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks