Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: L322 Touring Mods

  1. 13th December 2015, 09:27 PM #11
    uteman
    uteman is offline Master Subscriber
    Join Date
    May 2012
    Location
    Newport Victoria 3015
    Posts
    196
    Total Downloaded
    0

    How did u get power to roof rack lights

    Quote Originally Posted by healey88 View Post
    So in between beers and bathurst on Sunday I managed to get a few things done to the car.

    I found these great LED reverse/camp flood light which fit snug between the side of my roof cage and look great. Sadly yes I do care too much about how things look.


    Then in the afternoon I installed this nifty voltmeter into the center console where the old phone used to rest. It does involve making a few holes in the phone cradle but worth it.

    The parts required to install this were:
    • LCD Volt readout screen

    • 3 way switch with 'I' '0' and 'II' buttons

    • 10m of positive red cable

    • 5m of negative black cable


    All up this came to around $30. I already had a solder at home which is required.

    I ran the positive cables from both batteries to the switch, then the middle connector on the back of the switch ran to the positive of the voltmeter and the negative of the voltmeter ran to ground. Simple install, only time consuming part was running the wires.




    All in all very happy with the result.

    Next up is the LED bar, im getting some steel fixing points welded to the cage this weekend so hopefully Ill be able to show some photos and possibly wire it all up sunday!
    I am wondering how you ran the wires to light bar etc?
    Last edited by p38arover; 13th December 2015 at 09:33 PM. Reason: Deleted advert. Do it via PM
    Reply With Quote Reply With Quote
  2. 28th December 2015, 07:04 PM #12
    Strangerover
    Strangerover is offline Master Supporter
    Join Date
    Mar 2014
    Location
    Blackburn, VIC
    Posts
    147
    Total Downloaded
    0
    Quote Originally Posted by healey88 View Post
    I found these great LED reverse/camp flood light which fit snug between the side of my roof cage and look great. Sadly yes I do care too much about how things look.
    Hey, nice rack! Which point did you choose to get power up to the rack? I've been mulling my options for a while, don't want to drill anything...
    Reply With Quote Reply With Quote
  3. 24th May 2016, 01:43 PM #13
    CSBrisie's Avatar
    CSBrisie
    CSBrisie is offline Wizard Subscriber
    Join Date
    Jun 2009
    Location
    Queensland
    Posts
    1,048
    Total Downloaded
    0

    Expo Roof Rack

    Hi All,
    I'm heading out to Innaminka/Coongie Lakes/Birdsville in July and want to mount two jerry cans and a small gas bottle on the RR factory expo rack...its not ideal for this TBH - Rhino et al are much better designed with heaps of specifically designed accessories (eg genuine twin jerry can holders, 4kg gas bottle mount, spare wheel mount etc).

    Anyone seen anything I could use for mounting safely two jerry cans and a gas bottle - that might suit the tubular alloy design of this expo rack? The extra spare can just use a tri strap.

    I note the 2006 G4 Challenge cars had a floor fitted (see photo) so I might go that route.
    cheers

    Chris M
    Attached Images Attached Images
    L405, Vogue SE, 4.4SDV8, 8 speed, Rear e-diff
    Reply With Quote Reply With Quote
  4. 9th June 2016, 04:05 PM #14
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    Here's my roof rack using a basket from a Patrol, now only needing some paint splashed on the brackets and rails. It hasn't been for a run yet so I don't know if its noisy or not.
    right rear.jpg
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  5. 9th June 2016, 05:25 PM #15
    p38arover's Avatar
    p38arover
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!     Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,708
    Total Downloaded
    1.63 MB
    Quote Originally Posted by Graeme View Post
    It hasn't been for a run yet so I don't know if its noisy or not.
    If the Rhino Pioneer Platform on mine is anything to go by, it will be very noisy. Fortunately the L322 seems to be well insulated from noise and it's only an issue if I open the sunroof.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever
    Reply With Quote Reply With Quote
  6. 9th June 2016, 05:38 PM #16
    Homestar's Avatar
    Homestar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    The 2 roof bars in mine make a bit of noise compared to when they aren't on, but it's not a huge issue. I don't use the sunroof so I wouldn't know if it's noisy with it open.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
    Reply With Quote Reply With Quote
  7. 9th June 2016, 06:35 PM #17
    rar110's Avatar
    rar110
    rar110 is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    Here's my roof rack using a basket from a Patrol, now only needing some paint splashed on the brackets and rails. It hasn't been for a run yet so I don't know if its noisy or not.
    You could attach a scoop to the bottom rail of the rack. I'm sure you've thought of that.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137
    Reply With Quote Reply With Quote
  8. 9th June 2016, 07:22 PM #18
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    Quote Originally Posted by p38arover View Post
    Fortunately the L322 seems to be well insulated from noise
    I agree. For the last 2 weeks or so its had 2 open-ended lengths of 25x25 rhs side rails but I couldn't hear any more wind noise than usual even at 110 kph. The ends will be plugged after the rails are painted.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  9. 9th June 2016, 07:26 PM #19
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    Quote Originally Posted by rar110 View Post
    You could attach a scoop to the bottom rail of the rack. I'm sure you've thought of that.
    A solid floor over the front portion of the mesh floor seems to be a popular fix.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  10. 9th June 2016, 07:49 PM #20
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Nice dog Graeme ☺☺☺

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
Page 2 of 3 FirstFirst 123 LastLast
« Head unit replacement | Firewall bung »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!