Thread: Rear Dust Deflector

It only has to direct some air down to reduce the lower pressure that causes the dusty air to rise. As it mounts in the stop-light mount, its height and angle could be adjusted although much of a change in angle would make the ends curl upwards and look strange. For 69 GBP plus postage (hopefully not to much) I'll give it a try.

Edit: Ouch! 99 GBP delivery. It might not be much more for 2 or 3 but then would need to distribute the other(s).

And then you have to paint it. Why do they say Vogue only?

The problem is also finding something that looks OK.

It probably wouldn't be hard to make something that looks reasonable and could be fitted for trips. Perhaps a couple of fibreglass mouldings that fit each side and direct air down and diagonally across the window.

Originally Posted by p38arover

And then you have to paint it. Why do they say Vogue only?

.....

Vogue as opposed to RR Sport

It also appears that "Vogue" is synonymous with L322s rather than P38s or L405s and even though lots of L322s didn't wear a Vogue badge, including mine that I refer to as a RRV.

Originally Posted by rar110

I did see an my12 shaped Autobiography L322 in Brisbane with an added section to the roof. It looked like a sun visor for the rear window but could have been to keep dust off. This looks like it
Attachment 103840

This is different to the others.

If one fits a deflector, I wonder what the effect of a loaded roof rack might be?

Probably upset the airflow so that it no longer works!

Here's the clear film. Perhaps better if not so wide to avoid the raised section although I wanted protection along the bottom for a little further. The cover strip was removed during fitment.