Results 1 to 4 of 4

Thread: 2.6l cracked Manifold fix??

  1. #1
    Join Date
    Mar 2013
    Location
    Sydney
    Posts
    27
    Total Downloaded
    0

    2.6l cracked Manifold fix??

    Hi all,

    I have a fine hairline crack in the exhaust manifold of my 2.6l Series 3.
    Very small and hasn't propagated too far.
    Just noticed it after sandblasting - Has anyone got any experience using a product called Fireseal 2000? from the Por 15 people ?

  2. #2
    Join Date
    May 2013
    Location
    Bittern Vic
    Posts
    516
    Total Downloaded
    0
    No , but a good boiler maker should be able to weld the manifold and fix the crack before oit gets much worse

  3. #3
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    316
    Total Downloaded
    0

    Weld it

    I had my manifold welded. Lucky the crack was reachable to weld with cast iron rods in situ.

    Alternatively you need to bolt it to a plate ( or sister it to a similar, but if you had a spare you would have fitted it and be driving away) .. So it doesn't warp.

    You usually preheat the cast before welding.

  4. #4
    LandroverScott Guest
    I bought a NOS one a couple of years ago for about $180, if you find one around this price it's probably cheaper than getting it welded up....

    regards
    Scott

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!