Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: My P38a eats coolant ...

  1. #21
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    The last 2 manifold bolts. Look at bee utye's photo, and they are the opposite end ones to the 2 RH bolts ( that go in the holes) in the photo. If you feel along the rear of the manifold flange you can easily find them.
    Regards Philip A

  2. #22
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    Here are a couple of pics to add to bee utey's pic and PhilipA's comments:

    Top view with inlet manifold removed, rear of engine at right, bolt holes in question at top right.


    And another pic while putting it back together, bolts in question to left of injector.


    Hope this helps.

    Cheers, Paul.
    My toys, projects and write-ups at PaulP38a.com

  3. #23
    Join Date
    Jul 2008
    Location
    Geelong Victoria
    Posts
    940
    Total Downloaded
    0

    Fixed!

    Well, I finally fixed the problem. I took off the top half of the inlet manifold, and went to take off the bottom half. But I found that all of them were loose! Some by three quarters of a turn. So I tightened them all, reassembled everything, and it hasn't leaked a drop since.

    Thanks for all the help and ideas.

    Willem.

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!