Thread: Gen III Injectors and ACT SuperFlow Trumpets

I found the Rover V8 inlet manifold archive

Rover V8 inlet manifold photo archive

I note this comment on the Thor manifold v Gems

"the throttle body has a 68 mm throttle as standard and again, we often take this out, in this case to 71.5 mm. The Thor manifold, when used with either a standard cam or a mildly tuned cam, gives a strong torque peak at around 2,000 rpm, much higher than that achievable with the Lucas plenum design, but even with careful gas-flow work the power is limited. We find it difficult to achieve more than around 280 bhp with this manifold, where a similar amount of effort on a Lucas Plenum manifold will yield 320 bhp (but with less torque below 3,500 rpm) "

Steve

Hmmmm, 320hp!