Thread: Camper trailer electric over hydraulic upgrade

They are 1600psi, (TF1600). Even though mine had a 1000 sticker on it when I opened the box, yikes, I got straight on the phone to Felk and they guaranteed me that it was in fact 1600psi. They told me they hadn't used the 1000psi model for quite some time. They had run out of TF1600 labels and the designated 'label applicator' was meant to adjust the label by hand but didn't

Mick

G'day Weeds. The adapter BQ48 to go into the brake shut off valve, does it need anything else to make a seal or does its flare and the end seal into the opposing flare in the shut off valve. Hope that makes sense, in other words do I need anything else apart from 2 x BQ48 and then the 2 tube nuts.

Mick

Originally Posted by Cracka

G'day Weeds. The adapter BQ48 to go into the brake shut off valve, does it need anything else to make a seal or does its flare and the end seal into the opposing flare in the shut off valve. Hope that makes sense, in other words do I need anything else apart from 2 x BQ48 and then the 2 tube nuts.

Mick

The adaptor is self sealing as it's tapered, don't forget to put the nut on the tube before you flare........not that I did this haha