Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 51

Thread: PROJECT 4, Dual battery set-up for a Defender ( & other 4x4s )

  1. #41
    numpty's Avatar
    numpty is offline TopicToaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Nundle
    Posts
    4,077
    Total Downloaded
    0
    Quote Originally Posted by sclarke View Post
    What size are you guys fitting???
    NS70??

    I was in Century batteries yesterday as they are one of my clients and i was asking about prices.

    I'm looking at fitting 2 Century Marine Pro 500 in Grommet. physical size is 258x172x232. or i'll try to squeze the Pro 600 in, 305x172x232

    Prices...... well below Trade

    Will do some measurments and go from there.
    Grommet has a new battery, which might be 2 big for my needs, but will wait and see.

    Clarkie
    My second battery is N70Z which if I remember is about the size you quote for the Pro 600 but smaller than standard Defender battery. Sorry can't do better than that at the moment as vehicle is 1400 k's away.
    Numpty

    Thomas - 1955 Series 1 107" Truck Cab
    Leon - 1957 Series 1 88" Soft Top
    Lewis - 1963 Series 11A ex Mil Gunbuggy
    Teddy5 - 2001 Ex Telstra Big Cab Td5
    ​Betsy - 1963 Series 11A ex Mil GS
    REMLR No 143

  2. #42
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    5,461
    Total Downloaded
    0
    I bought a CP882MF from Comet today. It's a 95 AH deep cycle. I'll do some photos once I have it strapped in.

  3. #43
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,904
    Total Downloaded
    0
    Here’s X-Box's batteries inplace before being wired up, so you can how much room there is.


  4. #44
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    5,461
    Total Downloaded
    0
    Here is my install.
    Attached Images Attached Images

  5. #45
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,904
    Total Downloaded
    0
    Sorry Captain, that’s just not good enough.

    Take it for a drive and get it dirty, THEN it will look like a genuine fenda

    Cheers

  6. #46
    Join Date
    Feb 2007
    Location
    Doreen, Melbourne
    Posts
    612
    Total Downloaded
    0

    Pirhana Battery Tray

    Does anyone have pics of a Pirhana Battery Tray fitted to a D2? I bought one with the advice that it would fit existing bolts up against the firewall (passenger side) - can only find 1 of the 5 supposed bolts.

    Any help would be great.
    '01 D2 V8 4.6 Auto 7 Seater ACE
    Town Car - '11 Ford Mondeo Titanium TDCi -
    LROCV Member

  7. #47
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    recently installed - not yet connected as I need a good earth strap to connect the 2 batteries.

    My -ve lead came through the side of the seatbox which was a bit tight on the battery,



    so I moved it to enter the seatbox from the rear



    Installed the dual battery controller



    Temporary batteries - will be installing Red and Yellow Optimas in the opposite directions

    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250





  8. #48
    Join Date
    Jan 2007
    Location
    Perth, WA
    Posts
    1,655
    Total Downloaded
    0
    Quote Originally Posted by LRHybrid100 View Post
    Temporary batteries - will be installing Red and Yellow Optimas in the opposite directions
    If you're going to go that route, it's obviously not a cost sensitive install, so you might like to have a look at the Scorpion Racing dual battery tray - fits very neatly with that style of battery, and I think the Optimas have the holes through them for mounting the same as the Exides do?

    DualBatt1.jpg

    DualBatt.jpg
    Jeff

    1994 300TDi Defender
    2010 TDV8 RRS

  9. #49
    Join Date
    Feb 2007
    Location
    Doreen, Melbourne
    Posts
    612
    Total Downloaded
    0
    Quote Originally Posted by Signal1 View Post
    Does anyone have pics of a Pirhana Battery Tray fitted to a D2? I bought one with the advice that it would fit existing bolts up against the firewall (passenger side) - can only find 1 of the 5 supposed bolts.

    Any help would be great.
    Have fitted now...all good! cheesy.gif
    '01 D2 V8 4.6 Auto 7 Seater ACE
    Town Car - '11 Ford Mondeo Titanium TDCi -
    LROCV Member

  10. #50
    Join Date
    Jul 2008
    Posts
    126
    Total Downloaded
    0
    Hi All,

    I have just installed one of traxides SC80 controllers, with a 100ah Aux battery, a fitting for charging of the camper trailer via 50a Anderson plug at the rear and a temporary 2nd Aux battery in the Defender. I have a spare 100ah Lifeline sitting around, so for extended trips i can have plenty of reserve to keep the beer cold and run all of the extras.

    It was pretty easy in the end, but given the time i had i thought i would do it right... once. I now have the perfect setup for what i wanted, with good wiring and secure fittings. Happy!
    Attached Images Attached Images

Page 5 of 6 FirstFirst ... 3456 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!