Bundalenes Daughters 130 repair job

Back into the project again.


We use a product called POR15 rust preventative a lot. This is extremely resistant to rust. A second POR15 product we have used in the past is a fuel tank liner. This actually puts an epoxy lining on the entire inside of the fuel tank. Any small holes disappear.
http://img16.imageshack.us/img16/7416/oct27014.jpg]



The tray is nearing completion - needs soft sides and a top next. We coated the top side with POR15 rust preventative, prior to final painting.
http://img38.imageshack.us/img38/4649/oct27015.jpg

Fitted the home made drivers sill fuel tank into position and made / installed holding brackets, air breathers, fuel fillers and fuel outlet.

http://img136.imageshack.us/img136/3738/oct27004.jpg


Undercoat fuel tank with POR15 rust preventative.
Work on roof rack
Hifill tray sides
Etch prime wheels

http://img403.imageshack.us/img403/9950/oct27011.jpg


Make, test fit and etch prime checkerplate guard tops
https://www.aulro.com/afvb/

Erich

Hi Erich,

Working hard the photo of the tray is at night and Andy's car is still there :)

Looking good!

Cheers,
Remy

Quote:

---

Originally Posted by Bundalene

Back into the project again.









Make, test fit and etch prime checkerplate guard tops
http://img197.imageshack.us/img197/6813/oct27023.jpg

Erich

---

Erich why have you only cut one hole.... in the wingtops before priming?? you have the hi force vents on both sides

Quote:

---

Originally Posted by dullbird

Erich why have you only cut one hole.... in the wingtops before priming?? you have the hi force vents on both sides

---

.........and why is the hole that shape.............:huh:


.........Watch this space:D

McSnorkelage? :D

Quote:

---

Originally Posted by Shonky

McSnorkelage? :D

---

:Rolling::Rolling::Rolling:

Day 36

Completed welding brackets onto the bullbar for lights, aerial, fairlead roller holes etc etc
Also a lot of final colour painting:

tray sides
tray removable frame
mirrors and brackets (again for the 3rd time)
inside of wheels
guard tops




http://img682.imageshack.us/img682/5687/oct28005.jpg

POR15 rust preventative on :


bull bar
underside of tray
front portion of roof rack

http://img682.imageshack.us/img682/8770/oct28004.jpg

Also had a friend come over to measure up for making of the soft sides of tray back.

Erich

Day 37

primed bullbar and flares with 2 pack hifill


http://img4.imageshack.us/img4/5800/oct30007.jpg


Painted rims on other side

http://img97.imageshack.us/img97/3636/oct30010.jpg


POR15 inside of fuel tank, also coated a few jerry cans at the same time



Andrew started on the underside of the tray - pockets. mud flaps and flares.

http://img4.imageshack.us/img4/4463/oct30011.jpg


Erich

Must be getting close to finished, looks good.

Been meaning to ask what width and make rims are they?

Don't forget when its all ready to leave take some pictures of it all nice and shiny and then take some when you arrive at Gapuwiyak.

Quote:

---

Originally Posted by dm_td5

Must be getting close to finished, looks good.

Been meaning to ask what width and make rims are they?

Don't forget when its all ready to leave take some pictures of it all nice and shiny and then take some when you arrive at Gapuwiyak.

---

Found on page 6 of the thread:
"A set of 5 wheels 16 x 8 thanks to a stall at the event on Sunday - at $45 each quite a good deal we thought. These will have to be altered - centers moved or flipped to improve the turning circle. The one on the roof will be an alloy wheel."

Make of rims seems to be on the box and as it's Friday night I'm too lazy to quote it so it shows here!