Bundalenes Daughters 130 repair job

not to denigrate the great work you guys are doing, but something about the front hoop on the tray being black and the horizontals and rear hoop being white just doesn't look right... either all black or all white I say :)

yeah I know a bit like the non-matching mirrors from earlier in the thread :)

double post

Quote:

---

Originally Posted by EchiDna

not to denigrate the great work you guys are doing, but something about the front hoop on the tray being black and the horizontals and rear hoop being white just doesn't look right... either all black or all white I say :)

yeah I know a bit like the non-matching mirrors from earlier in the thread :)

---

The tray, roofracks, scrub-bars, rear flairs etc have not been painted yet. The tray has only been done in POR15. They will all be white at the end.


Andy

Today:

Primer - hi-filled the snorkel

http://img97.imageshack.us/img97/4121/nov5016.jpg


Installed the lower door rubbers - these are attached to the inside of the rock sliders. The pic below shows the door rubber with the small rivets holding the rubber to an alunimium plate and the larger rivets attaching the plate to the sliders.


http://img97.imageshack.us/img97/3982/nov5006.jpg


lower door seal completed. The above pic is of the rear door seal, this one is the front. I have a similar set up on our Defender and they seal well.

http://img36.imageshack.us/img36/8460/nov5012.jpg

Installed the guard tops

http://img36.imageshack.us/img36/9373/nov5014.jpg



More work on the rear tray cover

http://img12.imageshack.us/img12/8070/nov5004.jpg


Erich

good stuff all round :)

hmm enquiring minds and all that - what's por15 worth there? $64 a litre in Melb from the distro :O

Looking great guys

However looking at the last photo i'm very surprised that you haven't fitted rear LED's to the tail lights would be way more durable then a bulb in those conditions up there

All I can add is.........****ing awseome build:)

Quote:

---

Originally Posted by dullbird

Looking great guys

However looking at the last photo i'm very surprised that you haven't fitted rear LED's to the tail lights would be way more durable then a bulb in those conditions up there

---

The LEDs aren't connected yet as the tray has to come off again. We are driving the 130 around with the original lights temporarily hooked up. These will disappear soon.

Having said that, the globes in the round lights are actually LEDs

Erich

Quote:

---

Originally Posted by EchiDna

good stuff all round :)

hmm enquiring minds and all that - what's por15 worth there? $64 a litre in Melb from the distro :O

---

Thanks for the comment:)

$64 a litre is a good price. Wish I could get it locally for that. Our nearest supplier charges just over $80 a litre.

Erich

We are considering shortening the panard rod by about 20mm or so (actually making a new one - possible adjustable) as the front right wheel is about 25mm further out than the front left. Does anyone have any thoughts on this.

Erich