- 
	
		
                        
                                
                                        
                                                5th February 2013, 07:58 PM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
		
			Can anyone decifer this ??
		
 
			
				
					Ive had a look at the 3 plates sitting under the instrument cluster and being a noob at these old things im hoping someone can shed a bit of light as to what they mean, first plate is a small blue and silver one saying it was produced by Pressed Metal Corp LTD
 Body No-LRL909
 Ser No-109/909
 
 Below that is the rover Co Pty Ltd plate with
 Car No-123700429
 
 What do all these numbers mean??
 
 Also where do i find the chassis number and engine number?
 
 Thanks in advance all
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                6th February 2013, 12:26 AM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					PMC assembled your landie. That's their batch plate.
 The other one is the LR chassis # (for a 1957 vehicle).
 That should match the number stamped on the L/h rear spring hanger.
 1	Type: Land Rover
 23	Model: Land Rover, Series I
 Body type: Basic
 Wheel base: 109in (Long Wheel Base, LW 
 Engine: Petrol
 Destination: Right-hand drive (RHD), completely knocked down (CKD)
 7	Model year: 1957
 00429	Serial number
 
 So some of the PMC plate will now make sense to you?!
 
 
 
				
					Last edited by Cliffy; 6th February 2013 at 11:27 AM.
				
				
					Reason: Felt like it
				
			 
 
 
 
- 
	
		
                        
                                
                                        
                                                6th February 2013, 12:32 AM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Engine # will be on the l/h side up front near the water pump/thermostat.
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                6th February 2013, 06:22 AM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Chassis number on the left hand rear spring hanger. Stamped on the outside near the shackle.
 
 Keith
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                6th February 2013, 11:25 AM
                                        
                                
                                
                                        
                                                #5
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
					
				
		
			
				
					Yeah, that's correct on the s/n location.
 Started typing thinking it was an 80".
 Too late at nite to read my post propery!
 
 
 
 
 
 
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				 Posting Permissions
				Posting Permissions
			
			
				
	
		- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-  
Forum Rules
 
			 
		 
	 
 
  
    | Search AULRO.com ONLY! 
 | Search All the Web! 
 | 
  
  
  
Bookmarks