Reply With Quotewill look down the bottom shed tomorrow if fine..
i have a couple of sets down there but don't remember what breed...
ForumSage
Subscriberwarn, not worn!
i am after one warn m11 locking hub, i have read all the guff in the other thread re locking hubs for series jiggers, and agree that they may not save anything, but possibly create more problems than any possible saving.
but i have an idea.
i purchased a bunch of worn warn bits and have managed to cobble up one servisable locking hub, but things would be better if i had one on each side of the little series 2 a.
so if anyone has one the want to get rid of, or the well known bit that jiggers up in them, made from unobtainium into an unobtainium part,
i want one.
what i am after is one warn m11 ten spline locking hub.
Safe Travels
harry
SysAdmin (Owner)
will look down the bottom shed tomorrow if fine..
i have a couple of sets down there but don't remember what breed...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
SysAdmin (Owner)
well that was fruitless
man is going to have to have a serious look harry as they weren't where i thought they would be dam it..
hmmmmmm
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Fossicker
SupporterHarry,
If the hubs you are after are like the one in the photo, I have 1 and a half of them you can have
Peter
ForumSage
SubscriberYep, that looks like the critter!
Where is northmead?
harry
Fossicker
SupporterParramatta, Sydney
ForumSage
SubscriberAh, just around the corner from the Gold Coast ,
I will pm you in a day or two, out camping and doing this on a low battery phone
Thanks
harry
ChatterBox
Hi, I have these hubs on my landy and ive been told by lots of ppl that they are the strongest of all the a/market hubs available. The Yanks really love em too. Cheers Rod
Ps. Mine have been on since it was delivered in 1967. no breakages but a slight leak past the square section o'ring on the front. vehicle has done heaps of miles and lots of hard work going by the condition of it when I got it....lol. Cheers Rod
ForumSage
SubscriberI still haven't finalised this, I need a set of bolts to fit them to the car.
I need a set of six at least 3/8 x 3 1/4inch bsf bolts.
it seems they are a bit hard to find.
harry
RoverLord
Yes, particularly if you want them with AF heads like the originals! Of course, you can always do what I did for the missing bolts - got suitably longer UNF bolts, cut them off and rethreaded them BSF. Any worthwhile tool shop should be able to get you in a BSF die, even if they don't have them in stock.Originally Posted by harry
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks