Thread: My Series II barn find.

I do have a Salisbury available, but that won't be happening as I'd like to keep it as close to the 'period' as possible. Yes, I know the Series 3 motor isn't 'close to period' but with very limited wherewithal, it's the best I can do at present. At least it gets me down the road in an 'all Land Rover' vehicle.

Could anyone trace this vehicles history for me, please? I'd love to know anything you can tell me about it.

Chassis# 153101606.
PMC Plate: Body# LRL 4295. Serial# 1094295.

Thanks.

This is what CALVIN threw up
1 Type: Land Rover
53 Model: Land Rover, Series II
Body type: Basic
Wheel base: 109in (Long Wheel Base, LWB
Engine: Petrol
Destination: Right-hand drive (RHD), completely knocked down (CKD)
1 Model year: 1961
01606 Serial number

Thanks for that Scott. I was hoping for someone to chime in with a little of its history as well. I'd love to get an engine number, or for someone to suggest a range of numbers based on known vehicles of the period. I'm pretty sure it would be something like 1511xxxxx?

Originally Posted by schuy1

This is what CALVIN threw up
1 Type: Land Rover
53 Model: Land Rover, Series II
Body type: Basic
Wheel base: 109in (Long Wheel Base, LWB
Engine: Petrol
Destination: Right-hand drive (RHD), completely knocked down (CKD)
1 Model year: 1961
01606 Serial number

53 Model: Land Rover, Series II ???

The "1" in the chassis number means it is a Series 2, not a 2a and the "5" in the chassis number means it is a 109, the "3" means export, RHD, CKD, and the "1" following the "3" is for 1961.

The "53" has nothing to do with the actual year.

John

Thanks John. I just copy/pasted what calvin threw up, The resulting formatting does leave a bit to be desired!

Originally Posted by circlework

Could anyone trace this vehicles history for me, please? I'd love to know anything you can tell me about it.

Chassis# 153101606.
PMC Plate: Body# LRL 4295. Serial# 1094295.

Thanks.

What an awesome find! That will look even better when back on the road! Re history, have a quick chat with Diana in here. She was able to tell me a few things about Wifetec's Series 2.

Now, don't cringe at this suggestion, but if you are seriously thinking about making the Series 2 you're daily drive, try and find a 200 Tdi and a pair of Range Rover Classic diffs. The engine will fit the 2a box and the box will cope with a 200, the 2a radiator also copes, and early Range Rover 3.54:1 diffs are a straight swap for your 4.7:1's. The vehicle is already without its original engine, and (without some fancy carbs and some porting) the 2.286 is not that potent..

Good luck in the refurbish, look forward to seeing/meeting the end result!