Thread: One More Sleep......

A mate dropped me of some bits and pieces over silly season amongst the booty was two wiper motors and an odd bracket

Wiper motors first..... they appear reasonable quality and are about as heavy as the Lucas ones
it would seem they park by depressing flat steel tongue and rotating the motor left or right, anyone had anything to do with them???
Not sure how to get Bakelite on of switch of so I can possibly save them I'm assuming its a press fit but after the Jade choke button incident I'm a bit gun-shy

Any Thoughts from someone that knows these motors ????

IMG_4333.jpg IMG_4334.jpg IMG_4335.jpg

Then there is this odd bracket thing with hints of bronze green

IMG_4336.jpg IMG_4337.jpg IMG_4338.jpg IMG_4339.jpg IMG_4340.jpg

Need to retrain in picture posting but I think you get the idea......usually my blooper picture uploads appear at the bottom ...perhaps not this time

Cheers Paul

Just guesing but may be if you undo the two cover screws the switch knob will come off with the cover, but I could be wrong.

Following 1950landy's advice I got into the wiper motors today ....many years to late

IMG_4342.jpgbrass bushes metal gears IMG_4348.jpg gasket locating dowels on cover plate IMG_4343.jpg

Then....IMG_4346.jpg IMG_4344.jpg IMG_4347.jpg

However I did find a dash panel with a key that turns IMG_4350.jpg

Cheers Paul

Originally Posted by bemm52

Following 1950landy's advice I got into the wiper motors today ....many years to late

IMG_4342.jpgbrass bushes metal gears IMG_4348.jpg gasket locating dowels on cover plate IMG_4343.jpg

Then....IMG_4346.jpg IMG_4344.jpg IMG_4347.jpg

However I did find a dash panel with a key that turns IMG_4350.jpg

Cheers Paul

Good to be rite for once .

A bit of CRC or WD40,,, too easy mate

Finally I have two rust free chassis
IMG_4552.jpg IMG_4558.jpg

Now I need to get two serviceable bulkheads out of this collection
IMG_4554.jpg


Cheers Paul