Page 6 of 14 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 135

Thread: 1964 2a Rebuild (Storm)

  1. 11th June 2019, 04:18 PM #51
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    gear box time...... source of the bits of metal in sump plug has been foundIMG_1270.jpg

    Lay shaft shoulders have been knocked offIMG_1268.jpg have no idea what caused this but I have a spare shaft

    IMG_4863.jpg IMG_4864.jpg chip sitting next to shoulder on shaft

    Manual says shaft can be slid out from bell housing end so I'll give it a go

    Cheers Paul
    Reply With Quote Reply With Quote
  2. 13th June 2019, 04:56 PM #52
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    Attacked the layshaft swap today it went surprisingly easily.....hardest bit was getting selectors and shafts out and in....a bit like knitting

    Besides damaged shaft... two spring clips were broken on syncro...and bearing seized up (possibly lock tight from shaft retaining nut)


    IMG_4867.jpg IMG_4874.jpg fortunately every thing I needed came from this box a PO gifted me IMG_4876.jpg

    Cheers Paul
    Reply With Quote Reply With Quote
  3. 21st June 2019, 10:28 AM #53
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    Slowly slowly

    IMG_4892.jpg IMG_4890.jpg

    Cheers Paul
    Reply With Quote Reply With Quote
  4. 21st June 2019, 12:10 PM #54
    travelrover
    travelrover is offline Wizard Supporter
    Join Date
    Oct 2013
    Location
    Richmond, NSW
    Posts
    1,700
    Total Downloaded
    0
    Looking good...
    Cheers
    Travelrover

    Adventure before Dementia

    2012 Puma 90 - Black
    1999 Td5 110 Ute - White
    1996 Tdi 300 Wagon - White
    Reply With Quote Reply With Quote
  5. 17th July 2019, 05:05 PM #55
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    Another small step for mankind......got the hand brake fitted up and adjusted

    IMG_4943.jpg just need to source a return spring.

    Cheer Paul
    Reply With Quote Reply With Quote
  6. 25th July 2019, 05:06 PM #56
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    Bulkhead time need to turn a series 3 into a 2

    IMG_4957.jpg

    Donors IMG_4955.jpg IMG_4956.jpg hope to get glove shelf bit of the grey one (1964)

    PO painted over rust ????? IMG_4963.jpg Every where

    Made a start IMG_4965.jpg going to need a lot of cutting and shutting to get series 2 glove box shelf grafted in

    Cheers Paul
    Reply With Quote Reply With Quote
  7. 26th July 2019, 02:28 PM #57
    ezyrama's Avatar
    ezyrama
    ezyrama is offline Wizard Silver Subscriber
    Join Date
    Aug 2006
    Location
    Gold Coast QLD
    Posts
    1,746
    Total Downloaded
    0
    That's looking fantastic, Dont think I've ever seen a gearbox so clean.
    1964, S2a SWB "Ralph"
    1977, S3 SWB "Smeg" (Gone)
    1996 D1 300tdi auto (Gone)
    1973 Rangie Classic (Gone)
    2012, 110 (Series 12) Puma "The Tardis"
    1962 109" Tray Back "Ernie"
    1998 D1 300tdi (Dizzy)
    2017 Kawasaki Versys 1000

    You must now cut down the tallest tree in the forest... With... A HERRING!!!!!
    Reply With Quote Reply With Quote
  8. 26th July 2019, 03:47 PM #58
    4bee's Avatar
    4bee
    4bee is offline Cynical Moi?
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    It is a Land Rover. Wait until he puts the oil in.
    Reply With Quote Reply With Quote
  9. 26th July 2019, 04:30 PM #59
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    Made a bit of progress with bulkhead

    IMG_4969.jpg IMG_4970.jpg IMG_4973.jpg

    Shelf screwed in position ran out of acetylene so will weld later


    IMG_4976.jpg IMG_4979.jpg view from front worked out well IMG_4978.jpg

    IMG_4985.jpg


    Cheers Paul
    Reply With Quote Reply With Quote
  10. 26th July 2019, 04:34 PM #60
    bemm52's Avatar
    bemm52
    bemm52 is offline Master Silver Subscriber
    Join Date
    Mar 2013
    Location
    East Gippsland
    Posts
    993
    Total Downloaded
    0
    Quote Originally Posted by ezyrama View Post
    That's looking fantastic, Dont think I've ever seen a gearbox so clean.
    Paint is useful stuff.......
    Reply With Quote Reply With Quote
Page 6 of 14 FirstFirst ... 45678 ... LastLast
« Alternative gearbox S2a | These wrecks of any interest to anybody? »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!