Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Quandary

  1. #1
    Join Date
    Sep 2022
    Location
    Morayfield QLD
    Posts
    14
    Total Downloaded
    0

    Quandary

    I'm trying to solve a mystry.
    My 2a parts vehicle was origonally a six cylinder, now fitted with a 202 holden motor coupled to a Suffix F (1979 range rover) gearbox. What's with that?

  2. #2
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    19,161
    Total Downloaded
    152.79 MB
    Quote Originally Posted by Alpal View Post
    I'm trying to solve a mystry.
    My 2a parts vehicle was origonally a six cylinder, now fitted with a 202 holden motor coupled to a Suffix F (1979 range rover) gearbox. What's with that?
    Someone chucked it together with what they had lying around?
    ​JayTee

    Nullus Anxietus

    Cancer is gender blind.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  3. #3
    Join Date
    Sep 2022
    Location
    Morayfield QLD
    Posts
    14
    Total Downloaded
    0
    Chucked together is being too kind, you should see the motor mounts! I was hoping a better gear ratio might have something to do with it.

  4. #4
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    19,161
    Total Downloaded
    152.79 MB
    Quote Originally Posted by Alpal View Post
    Chucked together is being too kind, you should see the motor mounts! I was hoping a better gear ratio might have something to do with it.
    Yeah, well the Series gearing doesn't really suit the Holden conversions. But 1:1 is 1:1. Is it also a RRC transfer case?
    ​JayTee

    Nullus Anxietus

    Cancer is gender blind.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  5. #5
    Join Date
    Sep 2022
    Location
    Morayfield QLD
    Posts
    14
    Total Downloaded
    0
    Quote Originally Posted by Tins View Post
    Yeah, well the Series gearing doesn't really suit the Holden conversions. But 1:1 is 1:1. Is it also a RRC transfer case?
    Suffix F gearbox from 1979 Range Rover is not series gearing is it? I have no idea about transfer case but it has no overdrive if that's what your thinking.
    Unrelated. bulletproof cars prelong the plight aparently . Morituri Nolumus Mori.


  6. #6
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Will be an LT95 4 speed gearbox if out of a 70's Rangie. Not sure on the TC ratios though but they are a strong box - will stand up to the Holden engine basically forever whereas the Series boxes not necessarily.
    Last edited by Homestar; 16th November 2023 at 12:51 PM.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  7. #7
    Join Date
    Sep 2022
    Location
    Morayfield QLD
    Posts
    14
    Total Downloaded
    0
    Quote Originally Posted by Homestar View Post
    Will be an LT95 4 speed gearbox if out of a 70's Rangie. Not sure on the TC rations though but they are a strong box - will stand up to the Holden engine basically forever whereas the Series boxes not necessarily.
    That made me rush out and check things and you are correct, four speed pluss reverse. A pleasant surprise indeed. Could make it worth keeping. Is that a common conversion and if so what else to look for? My project has 186 with a Suffix B gearbox, salsbury diff and God only knows what else. Stainless fuel tanks. Living the dream.lol

  8. #8
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Defiantly worth keeping even if it needs work but if it hasn't been abused or done 400,000KM it will probably be fine. Much stronger box and overdrives are available if needed but a little rare but can be got if you keep your eyes peeled. If it's already been grafted to a 202 you have everything needed to bolt the 186 up to anyway so I'd be using this any day of the week over a series box. Check it hasn't got gear oil in it - they run engine oil. If it has gear oil in it then it's likely to have sheared the oil pump drive at some stage - which isn't a killer as the box will still work but if it's anything like mine it will just be a bit hard to get between gears when cold.

    Parts are still available for them as the Perentie boxes are a more recent derivative of the early LT95's
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  9. #9
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    The major issue with using the LT95 in a Series Landrover (other than a Series 3 Stage 1, which had it from new), is that it is designed for full time four wheel drive, with a centre differential between the front and rear outputs, with a vacuum operated lock diff lock.

    The problem with this for Series Landrovers is that with exceptions* the "steering" universals in the front axle of Series Landrovers are simple cross and bearing universals, which give kickback through the steering when on corners on hard surfaces.

    *Early 80" Series 1 were full time four wheel drive, and had Tracta CV universals in the front axle. Series 3 Stage 1 V8 (and Isuzu in Australia) were full time four wheel drive and used the LT95, and had similar CV joints to those used in coil spring Landrovers.


    Because of this issue, it is very rare to see the LT95 in Series Landrovers except for Series 3 Stage 1. The special parts used in the swivels of either the early 80" or in the Stage 1 axle are difficult to find. Some have converted the LT95 to selectable four wheel drive and removed the centre diff, and I believe there have been kits made to do this, but I have never seen one. It is, of course, possible that your 2a was in fact originally a Series 3 Stage 1, or it may have been fitted with a Stage 1 front axle, or, indeed, it may have Rangerover or Disco 1 axles, although the wider track would give this away.

    It does seem likely that you have a bit of a "bitza".
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  10. #10
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,127
    Total Downloaded
    99.87 MB
    To fit the LT95 into a 2a, you'll be missing a few cross members as well.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!