And the survey says??Quote:
Originally Posted by harry
Sent from my iPhone using Quasi nuclear phase interlocked
dipthrong retarder technology.
Printable View
And the survey says??Quote:
Originally Posted by harry
Sent from my iPhone using Quasi nuclear phase interlocked
dipthrong retarder technology.
Hi Brains Trust
Is the picture attached the correct bonnet mount rubber for the spare wheel? These were sent to me but are a lot different to the one's that were on the bonnet of Ralph and Smeg (my S3), Gotta mount up the wheel for Anzac Day as we have cars driving the veteran's in the march.
Thx in Advance
Ian
I know of three types, and that does not look like any of them.Quote:
Originally Posted by ezyrama
1. Two bolt rectangular with rounded corners, recessed bolt holes.
2. Single bolt, 5cm round, with a hole for the bolt and a hollow in the top for the head of the bolt.
3. Round, 5cm diameter , 12mm thick, integral bolt, smooth top.
These are almost certainly in date order.
John
Thanks John
Thought they were the wrong ones. They are totally different to everything I have seen before and I dont want to make the holes in the bonnet any bigger, I have another mate I was just talking to who might be able to use them on his Series 2 as it has a tdi style recessed bonnet. I will have to look for something else.
Regards Ian
I wasn't going to put a wheel on the bonnet for the march, s'pose I could if I had three assistants to fit it, but I would never be able to lift the bonnet to check the oil.
I don't think I will carry a spare for this day, as getting rid of it will give the pax more room and visibility in the back.
that picture is nothing like my bonnet rubber jiggers.
I'm probably going to ditch the spare for the Anzac march as well Harry, I would have to be unlucky to get a flat on such a short run. Don't like the look of the rubbers sent and I don't want to enlarge the holes that are there now anyway. I will have to look some more for the correct ones.
The buffer you have is for the 90/110
Hopefully you don't need the mount with the integral bolt.
MRC5627 BONNET SPARE WHEEL MOUNTING RUBBER | shop | www.lrseries.com
Cheaper to buy another vehicle......
The one that has a bolt to hold it in place is p/n 336473
336473 BONNET SPARE WHEEL BUFFER | shop | www.lrseries.com
Listed as '58 - '84 but currently out of stock.
Colin
:eek::eek::eek::eek::eek::eek: 69 quid each???? tell em their dreamin"Quote:
Originally Posted by gromit
Thanks Gromit, I'll try and find something at the foam & rubber shop me thinks.
Cheers Ian
I think there are some new door tops on eBay - $110 each they seem to have right and left side
have a look at mine on the weekend.