Page 4 of 4 FirstFirst ... 234
Results 31 to 40 of 40

Thread: Simpson in a III- Spare Tyre Carriage

  1. #31
    C00P Guest
    I used 6mm x 15mm machine screws with nylok nuts to secure the spare holder to the bonnet. The holes had to be reamed out slightly to take these bolts. It hasn't been put to the test yet as I've had to undergo a few repairs myself and can't lift anything heavy for a while.
    The rest of the assembly was riveted together with ally rivets 5mm wide by 10mm long (including the round head). These were just long enough for the job. And yes, you need to go to specialty suppliers for these- or your local friendly aviation mechanic.

    Coop

  2. #32
    C00P Guest

    Job Complete

    Hi Folks,

    Here's the final result. Thanks so much for all your help and advice. It all went together quite easily, with just a little fiddling with the bonnet latch to get it to line up with the new bonnet.

    Regards

    Coop
    SandyNewBonnet2.jpg SandyNewBonnet3.jpg

  3. #33
    Join Date
    Aug 2011
    Location
    kangaroo island
    Posts
    45
    Total Downloaded
    0
    coop if you have painted your land rover where did you get you paint from I am thinking of painting mine this winter

  4. #34
    C00P Guest
    Hi Pezman,

    The paint I used is normal household exterior enamel. In the course of fitting an auxiliary fuel tank I cut a hole in the side for the new filler neck. I took this piece of metal (which was painted) to a local Solver paint dealer . He used a computer system to get an initial "match" but then tweaked it by adding small amounts of various tints to get it even closer to the original colour. I was impressed with his skill, dunno if you can find someone in your area that can do a similar job. Its a bit of an art form.
    You may want to use automotive paints too, dunno how you go doing a match with those.
    Good luck,

    Coop

  5. #35
    Join Date
    Jan 1970
    Location
    CROMER, NSW
    Posts
    2,048
    Total Downloaded
    0
    Coop, while you may need to take two or even more tyres, do you really need to take 1 wheel rim for every tyre you are taking?
    if you are able to change a tyre in the field, then why take the extra weight of the wheels?
    You might get anywhere from 0 - 10 punctures on a trip like that, there are a lot of variables from the type of tyre you're running to your driving skill and style that are going to have an impact on the amount of tyre damage you suffer.
    a group of 6 crossing the simpson in 2002, all but one suffered no punctures in 7000km, that one copped 10, all on the back wheels in the middle of the tread. All were BFG mud terrains, his were of a lower load rating and could not handle the weight he had on board, most of it rearward of the rear seat.

    just a thought (OR TWO)
    LAND ROVER;
    HELPING PUT OIL BACK IN THE GROUND FOR 70 YEARS
    CARS DON'T GET ANY "GREENER" THAT.

  6. #36
    C00P Guest
    G'Day Barney,

    Thanks for the tips. I've got five tyres with an 8-ply rating (light truck) so I'm hoping that they will resist punctures reasonably well. We also carry a puncture repair kit which we can use if the hole isn't too big. A set of tyre levers and a spare tube will complete the kit we will be carrying. We will also be travelling fairly light as with our 2.25 petrol engine we have limited power.
    I'll consider carrying another spare tyre (sans rim) given your comments.
    We are following the Rig Road for half of the trip so hopefully won't risk too many punctures there.
    Cheers,

    Coop

  7. #37
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    go get a couple more items, stack them inside the spare carcass

    at least one more spare tube (I carry up to 5 depending on what Im doing)
    A decent tube repair kit
    A dozen tubless tyre patches (the kind you put on from the inside)
    A good long stroke double acting bike pump. (you'll be amazed at how many uses you can find for it) and some adaptors for it.
    A 1kg tub of talcum powder
    about half a dozen tubeless valve stems (2 of each primary size+2 to cover the size of your rims valve hole.

    Its a lot easier to just whip off a bead, pop in a replacement tube and fix the punctured one somewhere comfortable.

    If you're planning on playing in sand prefit the tyres with tube liners, they will help reduce the number of abrasion punctures and pinches you get from the beads walking and sand getting between the rim and the tube.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  8. #38
    C00P Guest
    The tyres I'm running (Olympic Steeltrek) are steel belted radials with a 10 ply rating (thought they were 8, but that's just the bonnet spare which is a different make). They all have tubes. Carrying a couple spare tubes isn't a bad idea.
    Did I forget to mention the vulcanizing kit for the tubes? Had one of them for years! But thanks for the reminder- I need to check how many patches I've got left.
    Tubeless tyre patches seem like a good idea- Dad used to call them "gaiters", so I guess these do the same job.
    We have a good quality electric tyre pump, and a long-stroke hand pump if the battery gives out, so I think I'll give the double-acting bike pump a miss.
    Would I bother with tubeless valve stems if all my tyres have tubes?
    Thanks for the tips Blknight, will rework the repair kit. Even if we don't use them this time, there will be plenty of more opportunities...

    Coop

  9. #39
    Join Date
    Nov 2009
    Location
    Sydney
    Posts
    501
    Total Downloaded
    0
    Quote Originally Posted by C00P View Post
    Not a bad idea- except that with my weight and strength I'd have to have tyre irons 8' long....

    Coop
    Don't forget your irons!

  10. #40
    Join Date
    Jan 1970
    Location
    CROMER, NSW
    Posts
    2,048
    Total Downloaded
    0
    i'm pretty sure gaiters are like a big flat strip that runs around the inside of the rim to protect the tube from any protuberances on the inside of the rim. some of the older splits had rivets and stuff on the inside.
    LAND ROVER;
    HELPING PUT OIL BACK IN THE GROUND FOR 70 YEARS
    CARS DON'T GET ANY "GREENER" THAT.

Page 4 of 4 FirstFirst ... 234

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!