Results 1 to 6 of 6

Thread: Air cleaner seal

  1. 3rd October 2015, 02:02 PM #1
    Aussie Bob
    Aussie Bob is offline Fossicker Subscriber
    Join Date
    Oct 2015
    Location
    Tasmania
    Posts
    32
    Total Downloaded
    0

    Air cleaner seal

    There is an "O" ring around the base of the air cleaner, mine is stuffed, any suggestions? I have had a bit of a search and found nothing.
    Reply With Quote Reply With Quote
  2. 3rd October 2015, 03:10 PM #2
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    I ran a couple of turns of teflon pipe tape round mine, seems to have dealt with the seeping oil OK. Have a talk to any bearing supply shop, most of them can make O-rings to specification - if you describe what it is for, preferably bring in the aircleaner (minus oil) they should be able to help.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  3. 3rd October 2015, 05:49 PM #3
    whitehillbilly64's Avatar
    whitehillbilly64
    whitehillbilly64 is offline ChatterBox Gold Subscriber
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0
    Hi Bob,
    I am in the process of doing up my air cleaner.
    Today I pulled it apart, and noticed the gasket, which is cork, had started to break apart.
    261414 AIR CLEANER CORK SEAL STRIP | Land Rover Series 1, 2 & 3 Engine Gaskets | shop | www.lrseries.com
    I am going to the local bearing shop to see if they have a square section 'O' ring that may fit. Sizes to suit will be available, according to the website below.
    Allied Seals Orings, Cord Stock, Square, Lathe, Spliced, Viton
    I washed the Gauze parts, in petrol, then hot soapy water, and spent the next 2 hrs blowing and picking out of the lower section about 50 small grass seeds.
    Now all clean and painted
    Do have to get a new cleaner to carby rubber hose, as mine tore apart as I checked to see if it was perished.
    Land Rover Parts - HOSE - ENGINE TO AIR CLEANER - L/ROV 2.25petrol 4 cyl

    whitehillbilly
    Reply With Quote Reply With Quote
  4. 4th October 2015, 09:15 AM #4
    Aussie Bob
    Aussie Bob is offline Fossicker Subscriber
    Join Date
    Oct 2015
    Location
    Tasmania
    Posts
    32
    Total Downloaded
    0
    Just one step ahead of you Hillbilly, mine all got painted yesterday! Thanks for the links and the info from JD
    Reply With Quote Reply With Quote
  5. 4th October 2015, 05:12 PM #5
    whitehillbilly64's Avatar
    whitehillbilly64
    whitehillbilly64 is offline ChatterBox Gold Subscriber
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0
    Posted pics on Gilberts post.

    whitehillbilly
    Reply With Quote Reply With Quote
  6. 6th October 2015, 06:41 PM #6
    whitehillbilly64's Avatar
    whitehillbilly64
    whitehillbilly64 is offline ChatterBox Gold Subscriber
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0
    Hi Bob,
    got a plain 'O' ring today.
    BS260.
    Seemed to clip together ok, but a few months until I find out if it worked.

    whitehillbilly
    Reply With Quote Reply With Quote
« Capstan winch | Brass Core Plugs 2.25 Petrol »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!