Reply With QuoteThey were a stock Lukey part. Cost $140. Not sure if they still make them.Originally Posted by Blknight.aus
RoverLord
I miss read the post... I read it as "you cant do it unless you have the extractors"
thats why I put the bit about the first bit of the exhaust following the standard path.
although I have seen a set of custom made extractors on a petrol 2.25 that tilted forwards on all of the ports and then curved back under the starter so you could still get easy access to the clutch slave and the starter.
whered you get your diesel extractors made up?
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Swaggie
They were a stock Lukey part. Cost $140. Not sure if they still make them.
Master
i cannot get that top bolt out. my 5/8 socket won't get in there and my ring spanners are hard to move. this is becoming a i bad idea for a simple job. i havn't touched it in a week. i will attack it tommorrow
brian
RoverLord
I use a 3/8th drive socket set but a set of narrow 1/2 inch should work...
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Master
i only have 1/2 inch as my lowest drive.
cheers
RoverLord
having just done the job I remembered a pertinent fact about the sockets.....
you need a 5/8th inch 3/8th drive socket thats ground down in height to get clearance on the casting for the cooling system welch plug.
Fortunately I had mine in my gash tools box so this presented no problem....
for the sake of "how would you do it without butchered tools I put the new starter back in without it and you need a 5/8th open ender to start with and its a case of tighten 1/12th of a turn, remove the spanner and turn it put it back on and tighten a further 1/12th of a turn and repeat and repeat and repeat and you get the idea. when it seats grab the 5/8th ringy and nip it up.
my sidcrhome ring open ender as too fat on the ringy end to get the clearance on the same casting protrusion to work without cross threading the bolt.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Master
i Just got back home from work. Been 4 weeks since being at home. I tried to purchase a starter at 4WD mel tho had none in stock. I have traced one done with a local sparky. will be fitting in the next 2 weeks. tho if anyone is interested $550inc from england if ya keen.
cheers
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks