Should go back and try it at 1800, that would test everything. Gearbox, patience...
Printable View
Should go back and try it at 1800, that would test everything. Gearbox, patience...
Gave it an oil and filters change.
Fitted my Woody that has been in the shed for a couple of months. I sleep better now.
Fitted a remote control to operate my SLS suspension up and down function.
Removed the rear lower shock mount cups.... with a hammer and some busted up chisels!!!
Not something I want to do again :mad:
http://imageshack.us/a/img4/7100/hbzv.jpg
Changed Timing belt on RRS tdv6 , will do rear fuel pump belt another day .!
Had a nice day in gembrook vic on tuesday until a loud metal cracking sound!
New axle and CV had to go in and now all finished included new swivel seals, and hub seals while i was at it.
lesson learned... don't use too much right foot through front axles!
Removed the factory glow starter off my RRC and made a switch for it in cabin.
Got home from a trip to town yesterday and when I got out of the Disco things did not smell right. Lifted bonnet and there was an almighty mess of coolant.
The thread insert in the top hose had come loose, so I set about a repair.
http://img692.imageshack.us/img692/74/9oz5.jpg
Just drove around with my S3 LWB and had a real good time doing it. Getting cold here in autumn, will be rarer now that i will drive it. Regards vom Austria! Thomas
Put an awning on
http://www.aulro.com/afvb/attachment...mer-awning.jpg
The young fella looks happy with your handy work :D