Not enough Room!
I was thinking of the same and realisd the disco evaporator would not fit. I ended up getting a later defender (puma) dash which is not a straight swap either. Good luck.
Gaz
Hi all,
Looking at "updating" my defenders A/C system, to that of a series 1 Disco. First step will be to relocate the fuse box. Thinking to put this under the drivers seat. Next step will be to put in the Disco A/C / Heater matrix in the place of the fuse box. Has anyone else attempted this, and can anyone see any problems with this mod???![]()
Not enough Room!
I was thinking of the same and realisd the disco evaporator would not fit. I ended up getting a later defender (puma) dash which is not a straight swap either. Good luck.
Gaz
Oh, forgot to mention, I'm fitting an auto to it as well, so the gear lever will be relocated as well.....![]()
i would simply go to a wreckers get a Toyota Tarago AC set up bolt it in under the rear seat plumb thru the hoses from the compressor under the bonnet disconnect the orig knee conditioning and remove it , fit the Toyota temp control to the centre consul and away you go
In the process of mine being done at the moment .... I have all the hardware and fittings just waiting for a mate to gas it all up![]()
Or you could just go and buy a puma 110, drove one for a couple of hours on the weekend, the a/c worked a treat. great car and cool to drive
![]()
I hear ya, love the Puma, just can't afford one. So trying to make honey out of horse manure. Don't like the way the defender heater and A/C are not connected. Makes it hard in NQ. I have actually had fog in the cab of my 110. This is why I'm trying to find a better way........
2011 Discovery 4 TDV6
2009 DRZ400E Suzuki
1956 & 1961 P4 Rover (project)
1976 SS Torana (project - all cash donations or parts accepted)
2003 WK Holden Statesman
Departed
2000 Defender Extreme: Shrek (but only to son)
84 RR (Gone) 97 Tdi Disco (Gone)
98 Ducati 900SS Gone & Missed
Facta Non Verba
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks