Master
Can ayone tell me whats the pin set up of the TPS on a D2 V8 ?
I need to know which pin in the TPS is Ground, which is Sensor and Which is +5vDC ??
The sensor is numbered 1 2 3 on each pin.
Cheers and thanks in advance.
Jeremy
AT REST
I gather you can't turn on the ignition and check? Back probe the connector with a fine solid wire (safety pin etc) and measure. On the D1 the sensor is plain red, the D2 keeps similar wiring colours so should be the same. My wiring diagram doesn't show the terminal numbers, someone with RAVE on their PC might be able to help.Originally Posted by Jezzaol
Master
Located it on Rave, thanks.
I was able to turn it on, but if fiited a Thor manafold on my D1 which is also fitted with Wolf fuel injection. I was able to find out what the original wires were but i needed to know what pins on the sensor each one went too !, took some tracking down but found it in rave after a while.
Cheers and thanks anyway
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks