Results 1 to 6 of 6

Thread: Anyone running 16x8 -25 Dynamics?

  1. 11th February 2012, 11:29 AM #1
    PSI250's Avatar
    PSI250
    PSI250 is offline Master Supporter
    Join Date
    Jan 1970
    Location
    Eastern Suburbs, VIC
    Posts
    627
    Total Downloaded
    0

    Anyone running 16x8 -25 Dynamics?

    Bit odd but just after a favour off anyone running 16x8 -25 dynamics.

    If possible could you please measure this lip here and let me know what it is? (just from the edge of the center, dont have to poke the ruler all the way in under the fold!) also if you could please let me know if its round hole or triangle hole.

    Cheers,
    Cal.
    1986 Range Rover Hiline
    2004 D2 TD5
    Reply With Quote Reply With Quote
  2. 11th February 2012, 03:37 PM #2
    clive22
    clive22 is offline Master
    Join Date
    Jul 2008
    Posts
    433
    Total Downloaded
    0
    Hi,

    Mine a triangular 16x8 -25mm Dynamics, about 21/2 yrs old. The measurement is 48mm, without inserting the ruler in the hole.

    However there is a fairly large radius there around 5mm; and the second part is not perpendicular to the rim, so this measurement is a bit difficult to measure.

    Clive
    Reply With Quote Reply With Quote
  3. 11th February 2012, 03:47 PM #3
    PSI250's Avatar
    PSI250
    PSI250 is offline Master Supporter
    Join Date
    Jan 1970
    Location
    Eastern Suburbs, VIC
    Posts
    627
    Total Downloaded
    0
    Thanks for that Clive, have you ever measured the backspacing on your rims, is it actually 75mm like it should be or is it slightly off?


    Cheers,
    Cal.
    1986 Range Rover Hiline
    2004 D2 TD5
    Reply With Quote Reply With Quote
  4. 11th February 2012, 10:10 PM #4
    rangieman's Avatar
    rangieman
    rangieman is offline Swaggie
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    I could measure my 15x8 dynamica,s if you want
    Reply With Quote Reply With Quote
  5. 11th February 2012, 11:07 PM #5
    Slunnie's Avatar
    Slunnie
    Slunnie is offline Swaggie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,141
    Total Downloaded
    99.87 MB
    Quote Originally Posted by PSI250 View Post
    Thanks for that Clive, have you ever measured the backspacing on your rims, is it actually 75mm like it should be or is it slightly off?


    Cheers,
    Cal.
    I think you'll find the 8" rim to measure about 9" externally, so converting from offset to backspace isn't as simple as that. I'd guess the backspace would be about 85mm.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
    Reply With Quote Reply With Quote
  6. 12th February 2012, 08:21 AM #6
    PSI250's Avatar
    PSI250
    PSI250 is offline Master Supporter
    Join Date
    Jan 1970
    Location
    Eastern Suburbs, VIC
    Posts
    627
    Total Downloaded
    0
    Quote Originally Posted by Slunnie View Post
    I think you'll find the 8" rim to measure about 9" externally, so converting from offset to backspace isn't as simple as that. I'd guess the backspace would be about 85mm.

    yeah, if you measure backspace from the very lip you add 1/2" to the measurements. as a 8" rim is 8" from bead to bead (9" from lip to lip)
    1986 Range Rover Hiline
    2004 D2 TD5
    Reply With Quote Reply With Quote
« TDV8 | Oil Contamination »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!