Results 1 to 4 of 4

Thread: D1 / RRC parts compatibility

  1. 25th June 2012, 08:21 AM #1
    loanrangie's Avatar
    loanrangie
    loanrangie is online now LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,771
    Total Downloaded
    1.13 MB

    D1 / RRC parts compatibility

    Found some spares from my old 85 RRC mainly bushes and seals , i want to use the panhard rod and front radius arm to diff bushes if they fit ?
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  2. 25th June 2012, 03:16 PM #2
    Dougal
    Dougal is offline ForumSage
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    The panhard rod fits, but the bushings/bolts are different. Half inch bolts on the RRC, 14mm or thereabouts on the later discos.
    You can swap the bushing over and it's all good.
    Reply With Quote Reply With Quote
  3. 25th June 2012, 04:03 PM #3
    loanrangie's Avatar
    loanrangie
    loanrangie is online now LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,771
    Total Downloaded
    1.13 MB
    Quote Originally Posted by Dougal View Post
    The panhard rod fits, but the bushings/bolts are different. Half inch bolts on the RRC, 14mm or thereabouts on the later discos.
    You can swap the bushing over and it's all good.
    Thanks mate, i thought there was a difference in the radius bushes - at least the panhards i can use since theyre polyurethane .
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  4. 25th June 2012, 04:59 PM #4
    Dougal
    Dougal is offline ForumSage
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Oh yeah, radius arms.
    Same bolt diameter, same bush OD but different bush inner sleeve width and wider spaced brackets on the disco axle.

    You can either swap bushings to suit or simply pack the width out to match.
    Reply With Quote Reply With Quote
« Timing v8 3.5 | Pitman/gear puller »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!