One of the best mods I've done was to cut an access hole in the outboard side of the drivers seatbox, to turn it into a useful storage compartment.
Leave about 50mm to each edge of the panel and cut the middle out with generous radii at the corners. A bit of edge strip from Clark Rubber on the remaining metal edge and job's done.
I store my air hose, jumper leads, and a couple of other regularly used items in there. Easily accessible with the door open, but as soon as you close the door the door card fits closely against it and stops anything falling out.
That would work out well for you if you fitted a compressor in there - just open the door when you are using it and it will get plenty of air.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Bookmarks