Thread: Need some advice

Originally Posted by UncleHo

I will have to check that out,as I know that mine has been accident damaged and could have the incorrect squab in it,as it catches me under the knee too.

cheers

Uncle, when I pulled my drivers seat out, base and all, I seperated the seat because I found the base cracked and needed welding. The base by the way is not interchangeable as the floor is not flat.
Quite by accident I noticed that the seat was not square.
I stood behind it tilted it back and saw that the squab was pointing off to the left. This meant that my right leg was resting across the top of the side raised area causing the discomfort.
I figured that the passenger seat squab must point off to the right which would mean that my leg would not be riding high on the side.
So pulled the passenger seat and swapped them around. All good !!!

Cheers.

Originally Posted by olbod

PS: to the above.
We know that when we bleed the brakes we dont push the peddle all the way down to the floor while we build up the pressure because doing so can damage the servo internls.
Cheers.

First I have ever heard of that. I must have buggered hundreds of them.

Originally Posted by Mr Whippy

First I have ever heard of that. I must have buggered hundreds of them.

Yes me too.
I read it here on the Forum somewhere recently.
But I will be careful in the future, just in case !!!