Reply With Quotego the ERG plate its easy enough, just give yourself a 25 degree margin on the temp clime rate when you're up near the 550-600 mark.
Master
Hi all . Need to fit a new exhaust temp gauge.
The question is, where is the best location for the most accurate reading. The egr plate would be the easiest spot to put the probe ,but not sure if in the exhaust dump pipe would not be the best spot. Not sure if it's best close to the head.
Thanks Matt
RoverLord
go the ERG plate its easy enough, just give yourself a 25 degree margin on the temp clime rate when you're up near the 550-600 mark.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Master
What's the highest I should let the temp go on a 300 Tdi?
Master
I've been told max 700 pre turbo. Anything higher you risk degrading your turbo.Originally Posted by landiematt
Also been taught to treat it as a guide on the engine rather than a direct measurement as a lot of things can alter your EGT's.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks