Well after about half an hour with speed up to 30km/h, the diff was slightly warm so I decided that will do.
As soon as I undid the plug I remembered why you shouldn't run engine oil in a gear box. The oil was all milky, not from water but air. Engine oil has detergent to wash the bores but that also lets it foam. I don't think I would have done any damage going for a short run but I'll remember now to only use engine oil in a diff or gearbox in an emergency.
I'll post some pics of the oil colour soon.
Happy days
Joel,
you're on top of the job mate, 30 mins is a good flush don't worry about the foam it will drain out, have a stubby or two with the plugs out.![]()
She got left to drain for over an hour as I had to go and pick my daughter up from school and take her shopping.
All done now though and fully degreased.
Happy Days.
Well this is what came out:
And this is what my flush oil looked like. The "engine oil" was the cheap oil I used for the flush looked like straight from the bottle and the other 2 are what they looked like when they came out.
I was happy to see the flush oil come out a bit dark as it means it did some good and actually flushed out some gunk. I noticed it was a little glittery in the sun too.
Happy Days.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks