Thread: IPF mouse switch wiring

Originally Posted by LandyAndy

Hi People.
I have an IPF branded driving light mouse switch.
I cannot find a wiring diagram for it on the net.Im sure some of you have used these switches with Drivesafes "High Current" wiring kits he makes for Fyrlyt spotties.
The mouse switch has a plastic connector that will be removed.There are 3 wires,need help with where they get connected too.I have an educated guess,hoping for the correct wiring code.There are 3 wires White,Red,Black.
My guess is 12V supply from hi-beam(red)???,12V supply to relay(white)???,earth(black)???.
Cheers
Andrew

BUMP.
Now pulling it apart,will post pics.
Andrew

Andy, i have the ipf mouse and a traxide kit but havent got as far as hooking that part up so will be watching this.
Probably going to do it tomorrow as today is a bit warm for front yard jobs.

Some poor quality pics.

Following the tracks on the PCB.
Black.Goes thru resistor,to neg post of green LED,and neg post of yellow LED
Red.Goes thru centre of PCB,to the centre 2 posts of switch.
White.Goes to pos+ post of amber LED and 2 bottom posts of switch.
The green LED pos+ post is connected to the top 2 posts of switch.

SO,black is earth.
Do red and white matter which connects to the relay and hi-beam supply????
The switch obviously has an on and off color.
Andrew