Results 1 to 5 of 5

Thread: What to use to seal 300tdi egr blanking plate?

  1. 5th February 2015, 03:35 PM #1
    ROAMER_AUS
    ROAMER_AUS is offline Master
    Join Date
    Dec 2013
    Location
    Melbourne
    Posts
    314
    Total Downloaded
    0

    What to use to seal 300tdi egr blanking plate?

    As title says, I took off the blaking plate to install egt sensor. Now I was hoping if I just put it back it will seal woth original gasket on it. No go. It leaks and it coated my turbine and intake pipie in this nice black exaust soot.

    Any ides on what to use to seal the blanking plate? Also the sensor mount that has been installed in the plate itself?

    Many thanks!

    Sent from my GT-I9305T using AULRO mobile app
    Reply With Quote Reply With Quote
  2. 5th February 2015, 04:19 PM #2
    bee utey's Avatar
    bee utey
    bee utey is offline AT REST
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Muffler/exhaust jointing paste, e.g. CRC "Maniseal", comes in a toothpaste sized tube.

    Reply With Quote Reply With Quote
  3. 5th February 2015, 04:21 PM #3
    redrovertdi Guest
    make sure both faces are clean and then apply maniseal,
    Reply With Quote Reply With Quote
  4. 5th February 2015, 04:55 PM #4
    ROAMER_AUS
    ROAMER_AUS is offline Master
    Join Date
    Dec 2013
    Location
    Melbourne
    Posts
    314
    Total Downloaded
    0
    Thanks! I actualy had a look at that. But I taught it will "glue" the plate so it may be difficult to remove again. Not true?

    Sent from my GT-I9305T using AULRO mobile app
    Reply With Quote Reply With Quote
  5. 5th February 2015, 05:07 PM #5
    Tins's Avatar
    Tins
    Tins is offline LordRover Subscriber
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    19,191
    Total Downloaded
    152.79 MB
    Quote Originally Posted by ROAMER_AUS View Post
    Thanks! I actualy had a look at that. But I taught it will "glue" the plate so it may be difficult to remove again. Not true?

    Sent from my GT-I9305T using AULRO mobile app
    Maniseal goes brittle, but is not hard to remove, but everyone I talk to recommends Permatex Ultra Copper. I have used it often, and it is great.
    ​JayTee

    Nullus Anxietus

    Cancer is gender blind.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.​
    Reply With Quote Reply With Quote
« Maxi Drive Portal Axle Drop Boxes | Range rover classic dash destroyed »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!