Thread: Difflocker ID

Definitely not Maxi-Drive.

DL

Are you able to get any more pics? Particularly the left-hand end to show how the seal housing is retained.

Originally Posted by POD

Are you able to get any more pics? Particularly the left-hand end to show how the seal housing is retained.

I'll have to get the young bloke to ask the seller.

Colin

If you can get a photo from both sides, I'm pretty familiar with the seal housing setup on the ARB as I had mine out 5 times before replacing it with the Ashcroft.

Looks very similar to mine (arb)

Originally Posted by Rick1970

Looks very similar to mine (arb)

I guess the ARB copies look the same as an ARB though.

Originally Posted by POD

If you can get a photo from both sides, I'm pretty familiar with the seal housing setup on the ARB as I had mine out 5 times before replacing it with the Ashcroft.

Picture of one side below.
Young bloke recons it's cheap but the seller isn't sure what brand because it came from a vehicle he purchased with it already fitted.

Colin

Not ARB- at least not the same seal housing as the ones I have worked with. The concept looks the same as the ARB but the fixing of the seal housing is different, which makes me wonder if it is a Roberts- the original design that ARB bought the rights to and market as though they invented it. If that is the case, I believe they were a good quality unit and Australian made, but probably hard to find parts for now.

Originally Posted by POD

Not ARB- at least not the same seal housing as the ones I have worked with. The concept looks the same as the ARB but the fixing of the seal housing is different, which makes me wonder if it is a Roberts- the original design that ARB bought the rights to and market as though they invented it. If that is the case, I believe they were a good quality unit and Australian made, but probably hard to find parts for now.

I'm guessing it could also be an ARB copy.

Thanks,

Colin