oh and I will soon be putting an EGT in I just bought from Thermoguard.
LRH
Since I did the TDI conversion I now have an after market temp - as the dash one was not calibrated the same as the TDI motor plus boost, oil pressure and a volt metre per battery.
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
oh and I will soon be putting an EGT in I just bought from Thermoguard.
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
Is that a digital type or analog? I want a digital one as opposed to the VDO Analog. They just look coolerOriginally Posted by LRHybrid100
![]()
photos, photos! how many times do i have to tell you guys! photos!LRHybrid100
Stevo_62
George130
PLEASE!!!!![]()
thanks trev!
ive got 4 gauges to stick somewhere??? i need ideas![]()
If you have a TD5 Extreme, the space under the radio can just fit two gauges. The other two could go as per my set up. Fuel and clock are not gauges you need to stare at.
Digital Vs Analogue? Go the analogue, you don't have time to interpret, (read), data when things are going badly. A quick glance at a pointer and you know if its in the wrong place.
Trev.
Mine is a digital guage - standard supply for Thermoguard.
I was looking at it today, but ran out of time to install.
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
thermo couple is in! now for the gauge?? might wait for the boost and tach to turn up![]()
phil
I'm going to make some 2 (or 3) gauge stainless steel (bling) mounting plates for the panel under the radio
who wants one?
see my post in "general chat" area, if I can get enough takers I would think they should be under $20ea
How high does the gearbox oil temp gauge go?
Would an engine oil temp gauge be any use to add as well?
When I owned an Auster aeroplane forty years ago I considered adding an oil temperature gauge - mechanic said he had done it before, but owners always asked him to remove them because the readings frightened them.Originally Posted by gruntfuttock
(Gipsy Major 3 engine)
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks