Thread: Td5 timing chain advice

Pretty sure I didn't.

Let me know when it's finished, you can then do mine.

Im wondering why it's orange in my car as the other 10p motor here is yellow like the new parts

Originally Posted by V8Ian

Let me know when it's finished, you can then do mine.

Originally Posted by Epic_Dragon

Timing cover finally off today my goodness I'm all sorts of overwhelmed right now and missing my car and independence.
Its fascinating too though.
Its quite a mess under the timing cover. Haven't got any of it out yet as not really sure of the locking timing process as Google gives conflicting advice. Have the crank one in but the cam one at the top isn't in. Not sure if that means more turns?

Also there's bits of the timing tensioner that just isn't there any more. Worried its all throughout the engine
The little bolt at bottom of timing guide has no thread and isn't fastened in. How I'll never know

Give Dave Fare a hoy. He'll know. Probably jump in his car and pop over

Originally Posted by Epic_Dragon

....
Its quite a mess under the timing cover. Haven't got any of it out yet as not really sure of the locking timing process as Google gives conflicting advice. Have the crank one in but the cam one at the top isn't in. Not sure if that means more turns?
.......

in your first image the dark chain link need to be near the bottom of the crank, and you have two dark links that will show up at the top of the camshaft too.
Many engines have a 2:1 crank to cam ratio, so like you assumed, keep turning crank(pin out first, obviously) until the dark links line up top/bottom, and then finesse the crank a bit to get the crank pin in place again.

Originally Posted by Epic_Dragon

Do you need any extra bits? I'm going to order one

it was a long time ago now. From memory I ordered a new securing bolt as well from the research I did. That bolt has to be done up very tight. Otherwise it is complete to install .

cheers

Originally Posted by Epic_Dragon

Used the timing pin in to lock the crank was wondering a method for securing the motor so to speak and that was randomly on YouTube
Saw a lot of the crank the motor method but didn't do that with bits of timing chain tensioner where it's not meant to be



Bolt is out though Fire and leverage (and new rattle gun also had a go

Make sure this goes in the bin and you use a new one.

Originally Posted by d2dave

Make sure this goes in the bin and you use a new one.

Yes. Pretty sure it's a single use torque to yield bolt. You don't want the thing coming out. Or breaking