View Poll Results: Which Locker First Front or rear

Voters
68. You may not vote on this poll
  • Front Locker

    10 14.71%
  • Rear Locker

    56 82.35%
  • Don't bother

    2 2.94%
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: What Locker to do first

  1. #11
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    557
    Total Downloaded
    0
    I would think that a front locker would be extremely useful when you are ascending a very badly rutted track - the rear wheels are typically firmly planted on the ground but one of the two front wheels may be lifted in the air. So with an open front diff, the front wheels won't be doing anything to help drive the vehicle forward. A front locker fixes that problem.

    With a hill descent, you definitely want to turn the front locker OFF... and if you have a rear locker, it's sometimes good to have that turned on on very steep descents.

    Best thing to do would be to get both!

  2. #12
    Join Date
    Jan 1970
    Location
    Armidale NSW, Australia
    Posts
    311
    Total Downloaded
    0
    Has anyone here had a Tru-Trac Front and Rear?

  3. #13
    Join Date
    Jan 1970
    Location
    Melbourne, outer South East
    Posts
    2,283
    Total Downloaded
    0
    Mate swears that if you already have an LSD in the rear, a switchable locker in the front makes the best combo.

    However Discos don't have LSD in the back so I guess a locker in the back first is going to give the best result.

    I agree that a font locker would help out to more "pull" the car up on steep upward scrambles on losse stuff. The rear locker alone sometimes seems not effective to "push" it up and over. ( if you know what I mean )

  4. #14
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    I thought you might like these as well, there from Rovertracks in the US, the prices are in US dollars
    http://www.rovertracks.com/products/axles.html


    RoverTracks Heavy Duty Front Axles
    RoverTracks axles are made from a proprietary alloy used in a wide spectrum of heavy duty applications including off-road trucks, race cars and dragsters.
    The front axles are 1.25" in diameter. They feature a 24-spline differential end and a 23-spline CV end.
    Note: The front axles will not fit stock Discovery, Defender, or RangeRover Classic CVs. Stock CV joints MUST be upgraded in order to fit the axles.
    The axles are only for use with our heavy duty CV upgrade or Genuine Land Rover CV (part # AEU2522) (sometimes referred to as the Defender 110 1-ton CV). Please feel free to call with any questions.
    Heavy Duty Front Axle - $400/set
    Heavy Duty 110 CV Joint- $175 each
    Heavy Duty Front Axle & CV Joint Upgrade Kit - $860/kit


    I think there available for the Disco II now as well.

    Baz.




    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  5. #15
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    1,681
    Total Downloaded
    0
    Snip
    Quote Originally Posted by tempestv8
    With a hill descent, you definitely want to turn the front locker OFF... and if you have a rear locker, it's sometimes good to have that turned on on very steep descents.
    My experience says otherwise - control is more important. There are very few hills around that a rear locker would make a difference downhill. Pumping the brakes works much better.

    A rear locker doesn't act as an anchor. The problem with engaging the rear on a descent is that if its at all off-camber and/or wet, you're forcing a slide. One wheel wants to slip, and the car wants to try & swap ends. And most hills are off-camber to a degree.

    I prefer the slip-lurch-grab of a standard setup downhill. Maybe a fraction faster, but the wheels can follow the track, & its easier to keep pointed straight down the hill.

    If grip is a problem & you start tobogganing, the rear locker makes it worse. If anyone has been down to Dingo Dell in the wet, you'll know what I mean. Its sideways rally-style driving, albeit at 3 mph. Frightening stuff.

    The issue is acknowledged by the detroit locker manufacturer - heres a cut & paste from their FAQs:

    Slippery Roads: Vehicles equipped with traction differentials are inherently more sensitive to side slip. Use caution when changing speed on slippery or unstable surfaces; decelerate, but DO NOT APPLY THE BRAKE.

    Regards
    Max P


  6. #16
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by Tusker
    Snip

    My experience says otherwise - control is more important. There are very few hills around that a rear locker would make a difference downhill. Pumping the brakes works much better.

    A rear locker doesn't act as an anchor. The problem with engaging the rear on a descent is that if its at all off-camber and/or wet, you're forcing a slide. One wheel wants to slip, and the car wants to try & swap ends. And most hills are off-camber to a degree.

    I prefer the slip-lurch-grab of a standard setup downhill. Maybe a fraction faster, but the wheels can follow the track, & its easier to keep pointed straight down the hill.

    If grip is a problem & you start tobogganing, the rear locker makes it worse. If anyone has been down to Dingo Dell in the wet, you'll know what I mean. Its sideways rally-style driving, albeit at 3 mph. Frightening stuff.

    The issue is acknowledged by the detroit locker manufacturer - heres a cut & paste from their FAQs:

    Slippery Roads: Vehicles equipped with traction differentials are inherently more sensitive to side slip. Use caution when changing speed on slippery or unstable surfaces; decelerate, but DO NOT APPLY THE BRAKE.

    Regards
    Max P
    Yep i found that no lockers going down slippery hills was best, the hard way , although having ETC and ABS helps heaps.

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  7. #17
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    Slippery Roads: Vehicles equipped with traction differentials are inherently more sensitive to side slip. Use caution when changing speed on slippery or unstable surfaces; decelerate, but DO NOT APPLY THE BRAKE.

    i used to drive speedway! side ways is my bag baby!

    as for the locker, the front LDS true track works as good as a full locker in a traction controll spec vehicle! its bloody great! no problems with turning either. dont even notice its there. if the full detroit is to much for the rear of a 90(being short and pitchy) i'll be selling it and fitting another true track!

    cheers phil.

    ps the true track is cheaper than the full detroit, both cheaper than ARB too!

  8. #18
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    i would go the rear first if you plan on climbing mountains the weight transfer is to the rear so a locker on the rear is the go
    every diff i have broken (and thats a few) in my old rangies i was going up hills very scary stuff flying backwards

  9. #19
    Join Date
    May 2002
    Location
    Heathcote (in "The Shire")
    Posts
    5,348
    Total Downloaded
    0
    I'd go rear first. Whilst its true that weight tranfer is to the rear going up hills, its generally loss of traction on diagonals that will stop you. If the rear is open an front locked then I'd reckon you may not be much better off due to the lack of weight over the front end.

    Secondly - take a hint from 4WD/6WD trucks the traction aids are installed in the rear first. ie just about all new Isuzu/Hinos come with a detroit style locker in the rear from the factory.


    Martyn

  10. #20
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    ARB lockers are set up so that when you turn the rear on on the compressor is on.

    IMHO heres how Id wire it all up.

    The lockers would be wired so that you would have to turn on in sequence

    the compressor, the rear diff then the front.

    The Rear diff would be wired on a relay to the brake lights so that when I'm on the anchors the diffs would be unlocked and the vent side of the air system would be hooked to the vacume side of the booster for extra snappy disengaging
    Last edited by Blknight.aus; 18th September 2006 at 07:37 PM.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!