Thread: RR 15" rims what other make rims will fit?

Originally Posted by downundersteve

Hi
I am after a 15" rim as a spare for my 81' 2 door Rangie.

I was just wonder what other vehicle rims will fit my Rangie, if any, and be a simmilar width at 15"?

It would be easier to find say a 15" rim for a ford courier than for a Rangie.
(the ford thing was just an example)


Thanks
Steve

As far as I know the only vehicles with the same stud pattern are Discovery 1 and all Series/90/110/Defender - and except for Discovery they are all normally 16", although aftermarket 15" wheels are made for all of them. I do not know of any other manufacturer that has used the same stud pattern, but I am sure someone will correct me if I am wrong.
John

Originally Posted by JDNSW

As far as I know the only vehicles with the same stud pattern are Discovery 1 and all Series/90/110/Defender - and except for Discovery they are all normally 16", although aftermarket 15" wheels are made for all of them. I do not know of any other manufacturer that has used the same stud pattern, but I am sure someone will correct me if I am wrong.
John

I think the D1 only came with 16" - I don't think 18" came out for the Disco until the D2.

To be pedantic, there are lots of cars with the same 5-stud pattern but not the same PCD

Did the F100 use a 5-bolt pattern on the same PCD but not the same stud size?

It would be easier to just buy a set of old 15" Sunraysia-style rims.

Ron

Originally Posted by p38arover

I think the D1 only came with 16" - I don't think 18" came out for the Disco until the D2.

To be pedantic, there are lots of cars with the same 5-stud pattern but not the same PCD

Did the F100 use a 5-bolt pattern on the same PCD but not the same stud size?

It would be easier to just buy a set of old 15" Sunraysia-style rims.

Ron

To be pedantic, it wouldn't be the same pattern if the PCD is different

F100 is different its the same as suzuki

Nothing else fits a rover except a rover

Commodore rims can be modified to suit, but it is very expensive to do

Originally Posted by dobbo

Commodore rims can be modified to suit, but it is very expensive to do

Read the first post

he wants a rime for a CLASSIC RANGE ROVER

Not series 2 disco

Hi Dobbo
Possibly for the Disco2,but not the Disco1,have a look at a series landy wheel you will see there is a big difference,
Hi Ron
F100 rims wont fit either,was given a set once being told they were Landy rims,they wernt.
Hi Steve
Change over to 16" Disco1 steels,then you could buy mine My Bro,Matt has 2 15" sunrasiers with BFG A/Ts holding a series diff off the ground,give him a yell on 0408065273.Im pretty sure most of his series spares are up for sale.I dont think he has any rangie alloys,but you could ask.
Andrew

Originally Posted by rovercare

Read the first post

he wants a rime for a CLASSIC RANGE ROVER

Not series 2 disco

Silly me, it appears I have chucked an Ace

Originally Posted by dobbo

Silly me, it appears I have chucked an Ace

its the story of your life mate