Page 3 of 7 FirstFirst 12345 ... LastLast
Results 21 to 30 of 68

Thread: OK so it's a cracked head

  1. #21
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    When the fuel built up in the sump sufficiently it just started running away, revving its tits off, the only way to stop it was to stall in gear.

    Apparently if the fuel is leaking directly into the combustion chamber they can hydraulic on it.

  2. #22
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    1,681
    Total Downloaded
    0
    Frenchie,

    So what caused that? An hydraulic with fuel obviuosly is injectors. But how did it get in the sump? Past the rings?

    Regards
    Max P

  3. #23
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    The fuel actually runs through the head, so a crack can allow it to mix with the oil, or in some cases to leak directly into the combustion chamber.

  4. #24
    Join Date
    Jan 1970
    Location
    Eidsvold QLD
    Posts
    2,691
    Total Downloaded
    0
    I wonder if it would be cheaper in the long run to retro fit a 300Tdi ?
    The Ugly Duckling-
    03 Defender Xtreme, now reduced by 30%.


    a master of invisibleness.

  5. #25
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    Quote Originally Posted by crump
    I wonder if it would be cheaper in the long run to retro fit a 300Tdi ?
    I've had a Tdi, wouldn't trust one as far as I could throw it.

    Anyhow, engine conversions usually cost a lot more than you think once all the modifications are taken into account.

    I've come to the conclusion that in the long run you just have to budget for major repairs every few years.

  6. #26
    Join Date
    Jan 1970
    Location
    Fairfield VIC
    Posts
    669
    Total Downloaded
    0
    What went wrong with your 300Tdi?

    I thought the 300Tdi are very reliable.

    Mine certainly is. Only major expense was the timing belt mod a couple of years ago...

  7. #27
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    Quote Originally Posted by mns488
    What went wrong with your 300Tdi?

    I thought the 300Tdi are very reliable.

    Mine certainly is. Only major expense was the timing belt mod a couple of years ago...
    Mine was actually a 200Tdi (which were supposed to be more robust )

    I'm probably being a bit unfair on it, only had two major problems.

    The injector pump fell apart on the inside and the main pulley bolt came loose which resulted in the end of the crankshaft being chewed off.

    That vehicle also gave me experience with the gearbox mainshaft failure and a broken CV joint.

  8. #28
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    Quote Originally Posted by Frenchie
    Mine was actually a 200Tdi (which were supposed to be more robust )

    I'm probably being a bit unfair on it, only had two major problems.

    The injector pump fell apart on the inside and the main pulley bolt came loose which resulted in the end of the crankshaft being chewed off.

    That vehicle also gave me experience with the gearbox mainshaft failure and a broken CV joint.
    Have you thought about not owning a car? mind you with your luck the public transport would break down everywhere you went

    if you need any help with UK purchases then i stilll have lots of friends and bank accounts over there! (hard to lose friends in 12 weeks when you have just moved to a hot country!)

    your right tho... shipping plus the cost of a new head shouldnt be that much.. not compared to what you were quoted... and if you do talk nicely to the sellers (or retailers) they may put the value of goods as $1500 but still keep the insurance at the retail cost to cover you for the worst case..

    Thanks

    Steve

  9. #29
    Join Date
    Jan 1970
    Location
    Alstonville...is near Byron Bay
    Posts
    3,034
    Total Downloaded
    0
    Strewth! For that price you could shove in a decent V8 complete!

    Sorry to hear of your head prob.....

    GQ

  10. #30
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    Quote Originally Posted by Quiggers
    Strewth! For that price you could shove in a decent V8 complete!

    Sorry to hear of your head prob.....

    GQ
    I aksed about that.

    Trouble is the gearbox would also need to be replaced (or at least the input shaft).

Page 3 of 7 FirstFirst 12345 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!