Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Turbo Wastegate Modulator, TD5

  1. #11
    Join Date
    Jan 1970
    Location
    Normanhurst, NSW
    Posts
    10,258
    Total Downloaded
    0
    Yep - the squarish one held on by two small bolts and with three small hoses connected - one at bottom and other two at right angles on top - and a two pin electrical connection on the bottom.

    Part No. for 2001 Disco is PMX 100130
    Roger


  2. #12
    Sharkee Guest
    Quote Originally Posted by twr7cx View Post
    Can anyone confirm that this is the modulator:




    And this is the actuator:




    I have been told about $48.00 for a new modulator.
    Sorry for hassling ya's but which one is which, pics are too small for me too see. roundish one in bottom pic is ...?. Anyone got bigger pics of them please, as I have a thin film of oil around mine and am wondering whether mine needs changing as I have slight similar issues up hills etc
    Thanks Steve

  3. #13
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by Sharkee View Post
    Sorry for hassling ya's but which one is which, pics are too small for me too see. roundish one in bottom pic is ...?. Anyone got bigger pics of them please, as I have a thin film of oil around mine and am wondering whether mine needs changing as I have slight similar issues up hills etc
    Thanks Steve
    That's the wastegate actuator.

    The modulator is square and is just behind the air con and has 3 hoses running off it.
    Last edited by Redback; 6th April 2011 at 08:01 AM. Reason: I'm a dumb arse and left a word out
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  4. #14
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Quote Originally Posted by Sharkee View Post
    Sorry for hassling ya's but which one is which, pics are too small for me too see. roundish one in bottom pic is ...?. Anyone got bigger pics of them please, as I have a thin film of oil around mine and am wondering whether mine needs changing as I have slight similar issues up hills etc
    The round one sitting on the top of the turbo is the actuator for the wastegate. When the modulator allows pressure through, and when there is enough pressure, it pushes on an internal diaphram and pushes the rod out which pushes the lever that it's connected to which opens the wastegate allowing some of the exhaust gases to by pass the exhaust turbine wheel in effect slowing down the turbo internal RPM.
    I don't know why it would get oil around it, unless there is oil in your air intake that is getting up there through the air lines. Or perhaps if one of the oil lines to the turbo is leaking.

  5. #15
    Sharkee Guest
    Thanks for the replies I'll check the hoses on/around it.
    Cheers Steve

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!