Reply With QuoteOriginally Posted by Phillip
Does it do it when you are stationary
Fossicker
Hi,
My disco has developed an engine vibration under 3000 rpm. Could this be caused by the engine mounts harding over time or something else. I have checked if the engine and gearbox are touching the chassis anywhere and found nothing. This has become very annoying. Any ideas anyone.
TopicToaster
Does it do it when you are stationary
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
SysAdmin (Owner)
when you say vibration do you mean one that travels thru the cab or more like a harmonic vibration ?
many tdi's will do it at about 1800-2200 rpm, hauling a very heavy load for an hour or so can cure it..... dont laugh, see it fix it on a few trucks...
also cracked body mounts, thinning exhaust tubing, the exhaust antivibration thingo just down from the manifold splitting, a crack in the chassis .... also cause vibrations i have seen, felt or been told about.
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
TopicToaster
I was more thinking (if it does it only when moving ) it can be the front prop UJ as they vibrate (when starting to go) when under load I.e under 3000 rpm
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
SysAdmin (Owner)
yeah, forgot about them :P
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Mines got it, started about 2 weeks after putting in the lift and so I checked everything I could think of and it checked out ok so I just ignor it, I think mine is actually in the trans as it is a little intermittant or else I just dont notice it all the time but it is at around the 1800 to 2200ish revs.
Could be a cracked drive plate as well but they normally get noisey at the same time.
Master
same here.
Master
Maybe the rear donut???????????
Cheers Dean.
Fossicker
Hi All,
The engine vibrates the body when stationary as well. It is a manual gearbox. I have checked all the uj's and donut and all is fine. The exhaust is well clear of the chassis. It does produce a harmonic vibration through the body when moving. Is this narrowing it down for anyone? I do a lot of towing with the caravan on behind.
Master
Sorry to bring up and old thread, but did anyone ever fix their vibration, did it just go away?
Mine has a similar vibration between 2000-2100rpm. I was hoping someone has fixed it.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks