Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: No start

  1. 31st July 2007, 05:23 PM #1
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0

    No start

    Now that the Fender is back together it won't start.
    Turn the key and everything lights up, fuel pump cycles as it used to. I can hear the solenoids but no starter motor. I have experimented and there is a noticeable power drain when it is in park as apposed to in gear.
    I have even pulled the transmission tunnel back out looking for any wires I had missed. I also have noticed that the key fob no longer has an impact on the rig. as in light on key fob works but no response from Fender. Any ideas on how to get the darned thing running?
    Reply With Quote Reply With Quote
  2. 31st July 2007, 05:40 PM #2
    Defender=1st Guest
    Could be something as simple as a sticking starter motor ?? (iam sure you would have already checked but that all i can think of)
    Regards Adrian
    Reply With Quote Reply With Quote
  3. 31st July 2007, 06:12 PM #3
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    Quote Originally Posted by Defender=1st View Post
    Could be something as simple as a sticking starter motor ?? (iam sure you would have already checked but that all i can think of)
    Regards Adrian
    Starter motor does nothing. I have the battery on charge at the moment just to remove it as a culprit.
    Reply With Quote Reply With Quote
  4. 31st July 2007, 06:21 PM #4
    dullbird's Avatar
    dullbird
    dullbird is offline Admin Gold Subscriber
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    its not the imobiliser is it??????
    Our Land Rover does not leak oil! it just marks its territory.......



    Reply With Quote Reply With Quote
  5. 31st July 2007, 06:27 PM #5
    Ging's Avatar
    Ging
    Ging is offline Fossicker
    Join Date
    Jul 2007
    Location
    Airport West, Vic
    Posts
    27
    Total Downloaded
    0
    If the starter motor is ok, any chance it could be the inhibitor switch?
    Reply With Quote Reply With Quote
  6. 31st July 2007, 06:42 PM #6
    dobbo's Avatar
    dobbo
    dobbo is offline OldBushie
    Join Date
    Jan 1970
    Location
    Close enough to their Shire to smell the dirty Hobbit feet
    Posts
    8,059
    Total Downloaded
    0
    Is gear selector in the right position in relation to the box?
    Reply With Quote Reply With Quote
  7. 31st July 2007, 08:04 PM #7
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    I suspect it's the immobilizer as the key fob can't get the doors to lock unlock or even the parkers to flash. I will be checking a bit later once the battery has been given heaps more juice.
    Reply With Quote Reply With Quote
  8. 31st July 2007, 09:56 PM #8
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    if the keyfob isnt working you will not get it to start unless you know the code and enter it in manually.......


    each time you need to start it........
    Reply With Quote Reply With Quote
  9. 31st July 2007, 10:00 PM #9
    Defender=1st Guest
    Where do you enter the code ?
    Reply With Quote Reply With Quote
  10. 31st July 2007, 10:03 PM #10
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    Quote Originally Posted by Defender=1st View Post
    Where do you enter the code ?


    first you need to know the 4 digit code........then you enter it via the ignition switch and the drivers door.......

    i will see if i can post up the procedure........its in the owners handbook........
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Disco Hand Brake cable? | 200tdi heads now rarer than hens teeth »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!