Thread: Anyone used a Detroit (Eaton) TrueTrac?

Originally Posted by cartm58

lol question asked, question answered

but l think the person asking the question wanted more information than that provided

Which proves once again the answer that is given is determined by the framing of the question

Question Do you have Eaton diff locks

If So for how long

If So what did you pay for them

If So what changes in your car on road handling characteristics have you observed

If So what change sin your off road handling characteristics have you observed

Have you tried them in sand

If possible can you compare them usefulness to ARB lockers

Are multi questions are best a murderer never confesses to the crime when asked the first question Did you know the victim ?

Dear god.......

I only wanted to know what people thought of them......

John, you ever been left wishing you'd fitted air/vac lockers as opposed to the Truetracs?

And for anyone not knowing what they are:
http://www.eatonperformance.com/diff...-Truetrac.html

Now why can't I cut and paste links here??????

They're not Detroit Lockers. They're a mechanical LSD.

Dear god.......

I only wanted to know what people thought of them......

got one in the front of the 90! had it b4 i put the rear detroit in the rear, flamin brilliant with the T/C.

cheers phil

Originally Posted by up2nogood

...John, you ever been left wishing you'd fitted air/vac lockers as opposed to the Truetracs?...

No, not yet.

Because I have other vehicles that are locked f&r and more capable in other ways, the disco is/was never intended for the hard trips.

The truetracs have performed well on medium trips. They are good on road (wet, dry or loose). Off road they leave you free to concentrate on driving. I haven't had any dramas on slippery side slopes, which was my biggest concern before I bought them.

I was told that they guarantee at least 45% dive to either wheel. Is that not correct?
I was also told about the touching the brake bit and this would effectively lock the thing.

Originally Posted by rick130

and FWIW a no spin is pretty easy to fit in a Sals as it only replaces the guts (cross shaft and pinions), the crown wheel is undisturbed, and hence doesn't have to be re-setup, reducing installation time/cost.

Interesting - so this would act similar to a Sals Truetrac?

If so I am even more interested!!! Where do I get such a "no spin" system?

LRH

If I could paste to this forum, I'd let you know.

As I can't check out www.eatonperformance.com

I have the true trac in the front of mine plus detroit locker in the rear makes a big difference off road and with the traction control the true tracks work great no reason not to fit them front and rear better on road manners

Originally Posted by LRHybrid100

Interesting - so this would act similar to a Sals Truetrac?

If so I am even more interested!!! Where do I get such a "no spin" system?

LRH

technically, a No-Spin is the same as a Detroit Locker, just doesn't use a complete, seperate hemisphere.
Because the Sals is so beefy and uses a 4 pinion centre you only need replace the guts, not the whole hemisphere as with, say a Detroit Locker in a Rover diff.
The No-Spin name is usually applied to truck applications and Detroit Locker to complete centre replacements.

I believe the cheapest supplier is the importer, Locked Drive Systems,
http://www.locked-drive.com.au/
although the usual suspects such a Opposite Lock sell them.