Thread: Roller Draws for Xtreme

I will send you a message with the basic plans.

Originally Posted by Snapper

I will send you a message with the basic plans.

Me too Please.


Please Mr Sapper...

and me!!! THX

geez snapper, by the looks of the demand, you probably should upload the file for all to read

Originally Posted by Snapper

I will send you a message with the basic plans.

Can I have a copy too

thanks

I will try to measure them up this afternoon and post here.










Or here.































Or Here.

The frame is built from 50mm x 25mm RHS and welded together.
Bolt frame directly to vehicle. Roller draw rails are 850mm closed and extend a further 800mm with an extended load limit of 160kg.
Use a piano hinge for the flip open lid. The deck is covered with checker plate rubber. I used 12mm hardwood ply for the deck.
The lock sits flush with the draw which I bought with the draw rails from a truck body builders supply shop.

I tried to save these to the gallery so they would be larger but had trouble uploading.
If you want clearer instructions just message me with an email address and i will send a larger file.

[ATTACH]Deck.jpg[/ATTACH]

P1010025-1.JPG

P1010028-1.JPG