Reply With QuoteI replaced the passenger side front regulator a couple of weeks ago and all the bolts were loose
Im guessing with the constant bumps and bangs the whole car gets they are bound to come loose at some point
RoverLord
Hi Chazza
You need to drop the glass to the lowest point and undo the 2 bolts that hold the glass to the mechanism,then lift the glass till closed and wedge so it stays up.Then remove ref-fit mechanism then lower glass then replace the 2 bolts that secure it to the mechanism.
ENJOY!!! You have probably already sorted it out!!!!
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Wizard
I replaced the passenger side front regulator a couple of weeks ago and all the bolts were loose
Im guessing with the constant bumps and bangs the whole car gets they are bound to come loose at some point
OldBushie
Got around to doing my driver's side front window today. Regulator is stuffed, rollers are stuffed... but it isn't loose. So I've ordered a new one. Very clean inside so don't know why it would go in less than 5 years
MY15 Discovery 4 SE SDV6
Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks