Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 50

Thread: Issues with new D3 TDV6

  1. #21
    Join Date
    Aug 2006
    Location
    Adelaide Hills
    Posts
    183
    Total Downloaded
    0
    Quote Originally Posted by WhiteD3 View Post
    Supercheap. 530mm I think. You have to buy the kit, not just the blades. Cost was $12 ea from memory.

    Did Bribie in early 2007 at 24psi and DSC on with no probs. That's me at the northern end in my avatar. I have learnt though that the DSC should be off for mud!
    The Aunger wipers set says on the packet 22 and the line below 560mm. On the back it says for Range Rover and Mercedes etc, doesn't mention D3. You get two metal arms and rubber blades for about $13. Got mine from Big W

  2. #22
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Quote Originally Posted by garryc View Post
    . Still waiting for parts after 8 days even though they said overnight delivery from interstate. Does anyone know if there is a shortage of turbos
    I need your VIN to check, there are about 8 different part numbers for the turbo! PM if you want.

  3. #23
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by BigJon View Post
    I need your VIN to check, there are about 8 different part numbers for the turbo! PM if you want.
    I really have nothing to add to this thread. But was wondering if you know what model garrett turbo they use?

  4. #24
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Not sure. The parts system doesn't tell me and we don't keep that sort of thing in stock so I can't eyeball one.

  5. #25
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Does the D3 have fly by wire accelerator ? symptom sounds like the delay my mate had in his TD5 110 ?
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  6. #26
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by WhiteD3 View Post
    Supercheap. 530mm I think. You have to buy the kit, not just the blades. Cost was $12 ea from memory.

    Did Bribie in early 2007 at 24psi and DSC on with no probs. That's me at the northern end in my avatar. I have learnt though that the DSC should be off for mud!

    did a 4wd course on bribie in the raaf back in early 90s, were had old 110s which were ok on the beach. Whole weeks was just a big bbq and **** up with a bit of fishing and 4wding thrown in. We did learn a little though!

    Haven't had mine in mud yet, dunno that I will. wife would craack a nana if it came home filthy dirty

  7. #27
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by stevo68 View Post
    In case you werent aware, where the tow points are ( ie power) there is a rear recovery point as well built into the chassis, ie have to take off the plastic cover to get to it. I now just leave the front and rear one off all the time.....just in case ,

    Regards

    Stevo

    Stevo,
    yeah I knew where the rear one was, just easier to use the towbar at the time.

    cheers
    me

  8. #28
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by waynep View Post
    doesn't the owners manual mention where the recovery points are ?
    manual? you mean I'm supposed to read the thing? Yeah I did read it when we got the car, just forgot 99% of it.

  9. #29
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by garryc View Post
    The "no response" symptom sounds like what I had last week. See my post in the D3 Zone forum. I had put my foot down to enter the freeway and it died. I immediately pulled over and stopped and restarted the car so did not see if it came good after a delay. The dealer said it was a turbo replace job. Still waiting for parts after 8 days even though they said overnight delivery from interstate. Does anyone know if there is a shortage of turbos
    ouch! Hope mine does not need turbo replaced as well. Mine does not die like that, just off for about 5 secs then off it goes, like the software goes into a loop while it sorting itself out then works out what gear and throttle is supposed to be at. Still when it does that when a truck is bearing down on you it is most disconcerting.

  10. #30
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Does the D3 have fly by wire accelerator ? symptom sounds like the delay my mate had in his TD5 110 ?
    dunno but I have a feeling it is

    probably got a uP to interface it too

Page 3 of 5 FirstFirst 12345 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!