Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37

Thread: Method of checking wheel speed sensor fault

  1. #21
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Hi Pedro
    How do you pull them out????
    Havent tried yet as Im waiting for a spare one to turn up.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  2. #22
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    t'is easy!
    remove wheel, caliper, hub, small allan screw,
    gently pull sensor up and out,,

    I'd have a stiff brush handy at the allan screw stage and clean up the area around it before removal.

    should release with a gentle suction "pop"
    there is a small o ring-- dont lose it!
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  3. #23
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Hey Pedro
    Now you have discovered WHICH wheel isnt working for you can you do the skid test and see if the OPPOSITE wheel to the non working wheel sensor is the one that skids as mine did.It will help with others later if we say skid your cars wheels,the opposite wheel sensor is your problem.Also what sort of speedo readings did you get??? Mine were 4 times what the single wheel should be reading for the same rpm in 5th at idle,a tad harder to check in your self shifter,but you should have a rough idea.
    Hope you get hold of a sensor from the supplier I mentioned in the PM,I didnt want to know what a newie is worth!!!!
    Andrew
    Quote Originally Posted by LandyAndy View Post
    That is my thought too Greame,it was suggested by a member that a wheel sensor reading that sort of speed is faulty,the same person also suggests that the skiding wheel has the faulty sensor.My opposite on the same axle skids.
    Was hoping Pedro discovers the same as I have so in future Pedro and myself can pass the correct info on to D2 owners as its such a common fault.
    Ive got a secondhand sensor coming,will see if it fixes everything.
    Thanks
    Andrew
    Quote Originally Posted by Pedro_The_Swift View Post

    am ASSUMING I will be doing a brake test around lunchtime today--


    OK,, so several brake tests done and witnessed by reliable mate,,

    the only wheel that locked was the wheel that DID NOT produce a speedo reading.

    felt a reduced ABS pulse during each test.



    cheapest sensor I can find is 175 from andersons in hervey bay,,,,,,335 from LR

    anybody got any other suggestions??
    testing OR pricing?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  4. #24
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Try Bundalene on Ebay.
    Ive got a S/H one on the way.$55 inc ph.
    He has more stuff than advertised,find his ebay shop and email a question.
    Nice helpful person.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  5. #25
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    yea,, already have

    and ---- no.
    has lots of D2 electrikery but not a front sensor,,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  6. #26
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    UNFORTUNATE!!!!!!
    Try Karcraft,inc postage they are always pretty good.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  7. #27
    WNE Me Guest

    ABS Xmas tree lights

    Hi Gents
    Just logged on to see if anyone has had this problem, it seems to be quite common. As a matter of interest my 2001 D2 has done 206,000km. Is this ABS fault a sympton of age or abuse? Or just another Landy built in headache.

  8. #28
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Fairly common.
    Off-roading seems to make it worse,mud/water/dirt seem to make maters worse.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  9. #29
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Andy I cant see how anything would get in there,,
    from my small look it seemed a sealed part of the hub that the sensor uses to read off,,,


    maybe heat???
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  10. #30
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Ok
    Fitted secondhand sensor.
    Same problem.3 amigoes and no speedo reading from that wheel.
    The secondhand one reads just outside the recomended value(950 to 1100ohms),1130 ohms.My other 3 that do work the speedo read similar values.ie just over 1100 ohms.
    Im getting the same ohms reading at the SLABs ECU input for that wheel,the value also changes if the wheel is rotating indicating that the sensor is OK(in my opinion).
    All fuses connectors checked.
    Starting to belive there could be a fault/dry joint in the SLABs connection.
    BlkNight Dave,this could explain your ability to induce the fault in yours by wriggling the harness.
    THOUGHTS PLEASE PEOPLE!!!!
    Thanks
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!