Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: 300tdi oil

  1. #11
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by Tank View Post
    False economy to do what Waynep says "change oil every 5000klms and Filter every 10000klms".
    The filter picks up most of the carbon and crap floating around in your oil and when you put in New oil the Old filter with all the crap in it contaminates your New oil, it's like having a shower with a raincoat on, it doesn't work.
    Replace your filter every time you replace your oil, Regards Frank.
    the filter actually picks up bugger all. A by-pass filter does something, but a full flow filter only picks up the bits after a component failure.
    Soot is in the sub-micron range. The only way to remove it, other than replace the oil, is use a centrifuge as fitted to the TD5
    The OE Tdi filter also only holds around 2-300ml of oil.

    FWIW, Toyota and Nissan have also had this as standard service procedure for years in their diesels and they last a very long time.

    BTW, ever thought about all the oil left in the oil cooler lines and cooler that can't drain out during an oil change ??

  2. #12
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Quote Originally Posted by rick130 View Post
    the filter actually picks up bugger all. A by-pass filter does something, but a full flow filter only picks up the bits after a component failure.
    Soot is in the sub-micron range. The only way to remove it, other than replace the oil, is use a centrifuge as fitted to the TD5
    The OE Tdi filter also only holds around 2-300ml of oil.

    FWIW, Toyota and Nissan have also had this as standard service procedure for years in their diesels and they last a very long time.

    BTW, ever thought about all the oil left in the oil cooler lines and cooler that can't drain out during an oil change ??
    Go for it then, it's your motor, Regards Frank.

  3. #13
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Quote Originally Posted by 5teve View Post
    but surely if the filter has filtered it then how can it get back into the system unless you run the oil in reverse? i dont see the logic there... plus the cetrifugal takes most out too doesnt it? (if the 300tdi has one)

    i seem to remember a post on here about the oil filter getting more effective the older it gets (up to point!)

    Thanks

    Steve
    Well then why change the filter at all, read the Factory service manual, if you want to save a couple of bucks, go for it, Regards Frank.

  4. #14
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    was just trying to apply my warped logic to it.. not argue..

    the TD5 i beleive for the factory service has the cetrifuge replaced every 20k k's and the cartridge every 60k k's i think.. something like that anyway.. (as i have a crap memory! ) but i dont think anyone leaves it to this anyway!

    Thanks

    Steve

  5. #15
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by Tank View Post
    Go for it then, it's your motor, Regards Frank.
    getting a bit testy there Frank.

  6. #16
    Join Date
    Jan 1970
    Location
    Melbourne, outer South East
    Posts
    2,283
    Total Downloaded
    0
    Sorry din't mean to start an argument ...
    the main reason I don't change the filter every 5000k is because I do that myself - I find the 300TDI filter a pain to change. I leave it to my mech. to do that every 10,000k. But surely renewing 80% of the oil has got to be doing some good ?

    Anyway I notice this advertised in the latest 4WD Vic magazine ...might even consider going synthetic if this does all it claims.....

    Red Line Oils Australia - Redline Motor & Gear Oil, Race Oils, Auto Transmission Fluid, Hydraulic Oils, WaterWetter, Fuel Additives, 2 & 4 Stroke Oils, Suspension Fluids, Fleet Products, Diesel Additives
    Last edited by waynep; 20th February 2008 at 04:49 PM.

  7. #17
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    manual says 10,000km oil and filter change, so there is absolutely no harm changing the oil at 5,000km and the filter at 10,000km.
    Yes, there will be some contamination by the oil remaining in the filter can, but it will be diluted by over 6 litres of fresh stuff. As I said above, exactly the same thing happens when changing the oil and filter together thanks to the oil in the cooler. This is why the oil appears to discolour so quickly in a Tdi.

    I couldn't be bothered changing the oil that frequently, just not required in my circumstances, and out of habit change the (expensive Donaldson) filter with the oil, but have done numerous services on Japanese diesels that call out the practice of changing the filters every 10k, oil every 5k. It's in their service manuals.

  8. #18
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by waynep View Post
    <snip>
    Anyway I notice this advertised in the latest 4WD Vic magazine ...might even consider going synthetic if this does all it claims.....

    Red Line Oils Australia - Redline Motor & Gear Oil, Race Oils, Auto Transmission Fluid, Hydraulic Oils, WaterWetter, Fuel Additives, 2 & 4 Stroke Oils, Suspension Fluids, Fleet Products, Diesel Additives
    Redline make some good lubes, but their engine oil isn't worth the $'s asked in Oz IMO.
    There is as good/better for 1/3 $'s

  9. #19
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Quote Originally Posted by rick130 View Post
    getting a bit testy there Frank.
    No mate, not at all just that in 30 years+ of mechanicing, I have never changed oil without changing the filter, no dealer or factory service bulletin I have seen has ever said not to change the filter when changing oil. If you dont think oil filters pick up particles of soot and metal. just cut one open and wash out the gunk and see. A filter will go into bypass when it can no longer filter the oil, when the pressure builds up in a blocked filter it by passes the filter medium. When I had my last truck (Mack) I used to run mineral oil and change it every 5000klms, which was once a week, 3 oil filters and 60 litres of oil, big bucks. I changed over to full Synthetic and stretched this out to 12000klms, big bucks saving. I would suggest anyone wanting the best out of their motors should be using Synthetic, best thing since sliced bread. Regards Frank.

  10. #20
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Wouldn't a better approach be to sample the oil and find out what's actually happening?

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!