Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Which steering box is best?

  1. #11
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    I thought that the weight would be a problem with freighting a box in but it was $740Aus landed at my door.Island 4x4 sent it over within a fortnight of payment. Pat

  2. #12
    Join Date
    Jun 2006
    Location
    Bundaberg Qld.
    Posts
    632
    Total Downloaded
    0
    That is a very good price Pat303. Was the box new or second hand.
    The one i have ordered is low mileage second hand. Apparently good used ones that are left alone last longer than a reconditioned one.
    84' 120" ute - 3.9 isuzu.

  3. #13
    Join Date
    Dec 2006
    Posts
    35
    Total Downloaded
    0
    After working on most boxes I think they are all pretty shyte to be honest, the later ones are just slightly less ****ty!

    The drop arm is the cause for most problems and the bending motion induced onto the shaft causes seal and bearing failure. The most common cure that works is to replace 1 cup full (how scientific!) of steering fluid with a cup of brake fluid. Its best if you do this on a power steering box that is in good condition with good seals and bearings. It wont do anything for a box thats past it. The brake fluid causes the seal to expand a keep a tighter seal on the shaft. It has worked for me for many thousands of miles and no further box failures happend to me or others who done this.

    Shouldnt I be writing this into my book of how to reduce the amount of leaks under your landrover?

    My usual legal disclaimer of you breaking something/someone or yourself else is included in here.

    Emerald

  4. #14
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Brand new.It even had an LR part number on it. Pat

  5. #15
    Join Date
    Jun 2006
    Location
    Bundaberg Qld.
    Posts
    632
    Total Downloaded
    0
    An update. The reason i dredged up this old thread is just over 18 months has past and i just noticed that my steering box has play in the drop arm shaft. It isn't leaking........yet. Very annoying. Was just wondering if anyone knows if there is a number on the box which would identified as a bush or bearing box (4 bolt).
    I still have my original 3 bolt, which developed an unusual leak through the casing and am trying to develop a plan. Rebuild the 3 bolt with needle rollers is the current favorite. (If i can stop the leak).
    Dan.
    84' 120" ute - 3.9 isuzu.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!