Reply With QuoteIn the process of trying to remove the door lock with extreme violence I am pleased to say when the door lock was given a good bashing from the inside and it released itself
Master
latest piece of advice from one who has done this many times before
break up the lock from the inside and fit a new lock
well will give it a try after the weekend
Master
In the process of trying to remove the door lock with extreme violence I am pleased to say when the door lock was given a good bashing from the inside and it released itself
Don't you just love .. when all else fails .. apply "Brute Force & ignorance" .. Fixes all / Best item in the tool boxOriginally Posted by alanbettison
Fossicker
I used lanox sprayed from the outside through the opening where the release rod goes through the rubber cover ( RH side of the handle ). It worked immediately I then removed the lock and did my best to clean it up . it was jammed up with dust and grease. The o/s handle was dry and not working properly so lubed that as well.
ChatterBox
try adding a second tension spring to compensate for the one in the grab handle. from memory it goes from the lever upwards to a spot near the " button" at the top of the door. the extra pressure seems to keep the old lock working for about three or so years now
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks